PDA

View Full Version : ECC83/ 5751 1950s niche vintage valves



da2222
21-05-2021, 19:10
Here are a few exceptional vintages tubes for sale that might be of interest...

The majority are very rare and sought after, some truly in the hen's teeth category. Although they are by no means cheap I have kept prices for tubes of the same type and quality below those on eBay and online tube sellers. All are carefully tested on a calibrated AVO 160CT and meet the new test parameters unless stated. A few people have expressed an interest in buying single tubes instead of pairs etc so I've listed them first. As you will see, in some cases the delicate writing has worn- common for tubes that are 70 years old or less ;-)


I x TELEFUNKEN smooth plate <> ECC83 BOXED £75

The chalk writing has disintegrated but the all important <> is engraved on the bottom. Sides are extremely closely matched.

https://i.imgur.com/iFyRA1p.jpg



1 x MARCONI ECC83 1950s long black plates, D getter £125

A classic, extremely rare, top quality manufacture and sonics

https://i.imgur.com/1n5LSXz.jpg



1 x TUNGSRAM ECC83 Foil getter, single support R5 date code 1959

My favourite ECC83 bar none. The foil getters come in single and double support versions and sonically I cannot tell them apart. Extremely rare ​SOLD

https://i.imgur.com/Vall12T.jpg



1 x TUNGSRAM ECC83 Foil getter, single support SILVER PLATES, N6 1960 date code; red stamp special selection issue £165

OK, so structurally this is the same as the previous Tungsram tube BUT with silver plates and special selection designation red stamp. Sonically I can hear no difference. No need to emphasise the ultra rare factor.

https://i.imgur.com/JQ2BsWR.jpg



1 x VALVO ECC83 long plate 1950s, large 45 degree O getter, 1950s MC1 date code £125
Much lauded online

https://i.imgur.com/NDpHjew.jpg



1 x MINIWATT/ AMPEREX BUGLE BOY ECC83 D getter long welded plates, MCA date code 1950s £265

Not really sure why I'm listing this as it's one of the earliest ECC83 versions manufactured by this brand and IMO the best sounding of its type. Singles ave been selling for £450 plus and one is currently on eBay for £700!! Deep pockets required

https://i.imgur.com/pFAC0eB.jpg



2 x TUNGSRAM ECC83 welded plates, red stamp special selection, MATCHED PAIR £125

These are super tubes with much of the flavour of the foil getters. Specially selected designation and matched- NOT the standard ones found on eBay

https://i.imgur.com/WOWZ7v8.jpg



2 x RCA 12AX7 long plate D getters MATCHED PAIR £125

The American classic 12AX7

https://i.imgur.com/xYSNIxC.jpg



2 x Siemens & Halske ECC83 twin supports 1960s MATCHED PAIR SOLD

https://i.imgur.com/W7mGQQe.jpg



2 x TUNG SOL 5751 long black plate D getter 1950s £125

https://i.imgur.com/lLmXOc3.jpg



1 x TUNG SOL 5751 3 mica black plate, D getter 1950s £75

https://i.imgur.com/JDn61zj.jpg



GE 5751 3 mica d getter £50

https://i.imgur.com/CltpfDQ.jpg

da2222
23-05-2021, 18:55
S & H ecc83 SOLD; TFK ECC83 sale pending

da2222
28-05-2021, 20:23
Tungsram ECC83 silver plate SOLD

da2222
19-06-2021, 18:34
Price reductions and additional rare valves priced to sell THIS WEEKEND ONLY:


2 X VALVO/ AMPEREX ECC186 7316 (SUPER HIGH SPEC ECC82) The best ECC82 type available?

2 x Mazda SILVER/ CHROME plate ECC83

2 x RCA long plate 12AX7

1 x Tungsram FOIL GETTER ecc83

2 x Tungsram specially selected red print halo getters

1 x Valvo BLUE label 6201

2 x Siemens & Halske ECC81 3 mica

2 x TUNG SOL 5751 long black plate D getter 1950s

karma67
20-06-2021, 18:17
prices?

da2222
10-10-2021, 13:09
Some updates: -)

2 X VALVO/ AMPEREX ECC186 7316 (SUPER LONG LIFE HIGH SPEC ECC82) The best ECC82 type available? £195

2 x Telefunken ECC82 <> £90 BARGAIN!!

2 x Mullard ECC82 (marked Phillips but Mullard date codes) Multiple pairs available £50 per pair

2 x Valvo E182CC (Phillips Herleen faded green print- RARE) £125

2 x Mazda SILVER/ CHROME plate ECC83 £150

2 x RCA long plate, square getter 12AX7 £95

2 x Tungsram specially selected, red print halo getters £125 BARGAIN!!

2 x TUNG SOL 5751 long black plate D getter 1950s £105

1 x Valvo BLUE label (Gf6) 6201 £145

2 x Siemens & Halske ECC81 3 mica £95

da2222
11-10-2021, 12:04
2 X VALVO/ AMPEREX ECC186 7316 (SUPER LONG LIFE HIGH SPEC ECC82) sale pending

da2222
12-10-2021, 17:46
2 X VALVO/ AMPEREX ECC186 7316 (SUPER LONG LIFE HIGH SPEC ECC82) sale pending ​SOLD

da2222
25-01-2022, 10:44
Some updates for January and temporary price reductions!

2 X VALVO/ AMPEREX ECC186 7316 (SUPER LONG LIFE HIGH SPEC ECC82) The best ECC82 type available? £195 (My penultimate pair of these!!!)

2 x Telefunken ECC82 <> £90 BARGAIN!! NOW £80

2 x Mullard ECC82 (marked Phillips but Mullard date codes) Multiple pairs available £50 per pair

2 x Valvo E182CC (Phillips Herleen faded green print- RARE) £125 NOW £110

2 x Tungsram ECC83 FOIL getter £235 NOW £200!!

2 x Siemens & Halske E88CC 'A Frame' 1960s £135 NOW £125

2 x Mazda SILVER/ CHROME plate ECC83 £150

1 x Siemens & Halske ECC83 Long plate 1950s £110 (tests V Strong)

1 x MARCONI ECC83 1950s long black plates, D getter £115

2 x RCA long plate, square getter 12AX7 £95

2 x Tungsram specially selected, red print halo getters £125 BARGAIN!!

2 x TUNG SOL 5751 long black plate D getter 1950s £105 NOW £95

1 x Valvo BLUE label (Gf6) 6201 £145

2 x Siemens & Halske ECC81 3 mica £90

da2222
05-02-2022, 14:03
2 x TFK sold

LAST WEEK at these reduced prices!

da2222
01-12-2023, 11:54
CHRISTMAS 2023 UPDATE

I'll be returning to the UK for Christmas and can bring any valves that float your boat with me. Some of those listed previously remain and I have numerous other very rare types (ECC83/82,E88CC, ECC81 etc) in stock. All tested an AVO 160CT. Drop me a message with anything you're interested in- I may have just what you need. :-) Cheers, Drew