PDA

View Full Version : Crossovers with Erie caps


andyrlb
04-04-2021, 10:03
Are these of any use to someone?
Obviously I’m unable to test the caps without removing them .
Taken from some hacker 3way 8ohm speakers.
The values are :
3.3uf 63v X2
4.7uf 63v X2
10uf. 63v X2
15uf. 63v X2
22uf 63v x4


https://uploads.tapatalk-cdn.com/20210404/6b9ec99411979728d4a41aeed72c20fd.jpg


Sent from my iPhone using Tapatalk
Firebottle
04-04-2021, 10:52
Those are going to be old. Looking at the numerals they could be 1974, I would imagine some have gone out of spec now.

If you have a way to test them you only have to disconnect one end to do so.
andyrlb
04-04-2021, 11:06
Those are going to be old. Looking at the numerals they could be 1974, I would imagine some have gone out of spec now.

If you have a way to test them you only have to disconnect one end to do so.

Hi mate, I will disconnect them tomorrow and then test them


Sent from my iPhone using Tapatalk
andyrlb
04-04-2021, 18:49
I just tested one 10uf which measured 15.3uf sadly


Sent from my iPhone using Tapatalk
Firebottle
05-04-2021, 06:22
:eek: Not even within +50/-20% and that's a lax specification.