gerlando
19-01-2021, 10:40
Audio Technica AT-OC9XEB MC cartridge in excellent condition.
I have upgraded, so the cartridge is now surplus to requirements.
About one year old with no more than 30 hours.
Bonded elliptical stylus.
It comes with original box, stylus guard, screwdriver and all the fittings.
RRP is £229.99
Product Description
https://www.audio-technica.com/en-gb/catalog/product/view/id/3996/s/at-oc9xeb/?gclid=CjwKCAiAgJWABhArEiwAmNVTB8w9M-a16mJ2w7pG87UJwF64pD8PJkqahK_gHofPKqRWccl8dbD_OBoC G70QAvD_BwE
Tech Specs
Model AT-OC9XEB
Mounting 1/2” centers / Threaded inserts
Frequency Response 20 - 30,000 Hz
Body Material Aluminium
Channel Separation 25 dB (1 kHz)
Output Channel Balance 1.5 dB (1 kHz)
Output Voltage 0.32 mV (@ 1 kHz, 5 cm/sec)
Vertical Tracking Angle 20 degrees
Vertical Tracking Force Range 1.8 to 2.2 g (standard 2.0 g)
Stylus Shape Elliptical Bonded
Stylus Size 0.3 x 0.7 mil
Stylus Construction Bonded round shank
Cantilever Aluminium pipe
Coil Impedance 12 Ohms (1 kHz)
Coil Inductance 25 μH (1 kHz)
DC Resistance 12 Ohms
Static Compliance 20 x 10 – 6 cm / dyne
Dynamic Compliance 9 x 10 – 6 cm / dyne (100 Hz)
Terminal Pins Brass
Wire Used for Coil PCOCC (Copper by Ohno Continuous Casting process.)
Recommended Load Impedance Min 100 Ohms
Weight 7.6 g
Dimensions 17.3 (H) x 16.8 (W) x 25.7 (L) mm
Accessories Included 1 non magnetic screw driver,
1 brush; 2 washers,
4 pairs of mounting screws: 5mm, 8mm, 10mm, 12mm
1 plastic protector
I'm looking for £110 shipped by Special Delivery.
Possible part exchange (+ money) with Hana EH / EL.
Thank you.
Mauro
https://i.ebayimg.com/images/g/yAkAAOSw5rJgBWCG/s-l1600.jpg
https://i.ebayimg.com/images/g/qYwAAOSwEOdgBWCB/s-l1600.jpg
https://i.ebayimg.com/images/g/UeMAAOSwaNdgBWB8/s-l1600.jpg
https://i.ebayimg.com/images/g/O8EAAOSw969gBWB-/s-l1600.jpg
https://i.ebayimg.com/images/g/lF4AAOSwbhRgBWCC/s-l1600.jpg
I have upgraded, so the cartridge is now surplus to requirements.
About one year old with no more than 30 hours.
Bonded elliptical stylus.
It comes with original box, stylus guard, screwdriver and all the fittings.
RRP is £229.99
Product Description
https://www.audio-technica.com/en-gb/catalog/product/view/id/3996/s/at-oc9xeb/?gclid=CjwKCAiAgJWABhArEiwAmNVTB8w9M-a16mJ2w7pG87UJwF64pD8PJkqahK_gHofPKqRWccl8dbD_OBoC G70QAvD_BwE
Tech Specs
Model AT-OC9XEB
Mounting 1/2” centers / Threaded inserts
Frequency Response 20 - 30,000 Hz
Body Material Aluminium
Channel Separation 25 dB (1 kHz)
Output Channel Balance 1.5 dB (1 kHz)
Output Voltage 0.32 mV (@ 1 kHz, 5 cm/sec)
Vertical Tracking Angle 20 degrees
Vertical Tracking Force Range 1.8 to 2.2 g (standard 2.0 g)
Stylus Shape Elliptical Bonded
Stylus Size 0.3 x 0.7 mil
Stylus Construction Bonded round shank
Cantilever Aluminium pipe
Coil Impedance 12 Ohms (1 kHz)
Coil Inductance 25 μH (1 kHz)
DC Resistance 12 Ohms
Static Compliance 20 x 10 – 6 cm / dyne
Dynamic Compliance 9 x 10 – 6 cm / dyne (100 Hz)
Terminal Pins Brass
Wire Used for Coil PCOCC (Copper by Ohno Continuous Casting process.)
Recommended Load Impedance Min 100 Ohms
Weight 7.6 g
Dimensions 17.3 (H) x 16.8 (W) x 25.7 (L) mm
Accessories Included 1 non magnetic screw driver,
1 brush; 2 washers,
4 pairs of mounting screws: 5mm, 8mm, 10mm, 12mm
1 plastic protector
I'm looking for £110 shipped by Special Delivery.
Possible part exchange (+ money) with Hana EH / EL.
Thank you.
Mauro
https://i.ebayimg.com/images/g/yAkAAOSw5rJgBWCG/s-l1600.jpg
https://i.ebayimg.com/images/g/qYwAAOSwEOdgBWCB/s-l1600.jpg
https://i.ebayimg.com/images/g/UeMAAOSwaNdgBWB8/s-l1600.jpg
https://i.ebayimg.com/images/g/O8EAAOSw969gBWB-/s-l1600.jpg
https://i.ebayimg.com/images/g/lF4AAOSwbhRgBWCC/s-l1600.jpg