PCB Production

[Pegwill]

Hi Guys

I’m looking for a recommendation for someone who produces PCB.s I only need one so looking for reasonable cost.

Thanks in advance for your help.

All have a good day.

Regards

William

[Blueflash]

I use Eurocircuits, they accept files from Eagle and KiCad and plain Gerber files.

Good quality as well.

https://www.eurocircuits.com/

[Folsom]

Do you need design work or just someone that prints?

[Pegwill]

Hi Folsom

I just need someone to print it’s in a Gerber/ Excellon file format.

Thanks

William

[Light Dependant Resistor]

Hi Guys

I’m looking for a recommendation for someone who produces PCB.s I only need one so looking for reasonable cost.

Thanks in advance for your help.

All have a good day.

Regards

William

Hi William
Easy EDA is highly recommended https://easyeda.com/

It is complete, from designing your pcb with a very easy interface that takes you through schematic placement then board design , generating a gerber file, and ordering your pcb
on a scale of the best, it gets 10/10

Unlike other programs ( IMO clunky dreadful interfaces ) that insist on you using certain unhealthy proprietary software, ( Kicad although as a unburdened file - never the less is clunky and just hard work ) easy EDA
in comparison runs in your internet browser, you can choose to keep your file private or indeed publish it if you are inclined.

Hope that helps

[Folsom]

Hi Folsom

I just need someone to print it’s in a Gerber/ Excellon file format.

Thanks

William


JLC, Seeed, DirtyPCB are some go to for inexpensive. If you need the finest quality Imagineering is great.

[Bksabath]

PCB GOGO from China 28871

Endless options and not expensive and turn around is really quick

I just had 10 U PCB made
Yes that is not a tipo 10 U in cooper weight

[Pegwill]

Hi Guys

Thanks for the replies. I will do some further investigation.

Regards

William