Magna Audio
22-09-2020, 19:43
Here's an armboard replication in aluminium. 10mm thick.
From finish to start.
Black lacquer and M3 caphead bolts for SME armbase mounting.
https://uploads.tapatalk-cdn.com/20200922/d73df9d9733d88239e8ee908b0cc60b9.jpg
https://uploads.tapatalk-cdn.com/20200922/4d1b778f7a51bad386fbba18e6ce365e.jpg
Etch primer phase. This gives a secure base on the aluminium for the top coats of lacquer.
https://uploads.tapatalk-cdn.com/20200922/0f3a6e4110d108aecafb1599d1d55c0b.jpg
The bare aluminium board. All fitting holes and shaping done
https://uploads.tapatalk-cdn.com/20200922/13a47013cc68f06b00e76fc19a2a357d.jpg
Cut to shape. Alongside the wooden board it will replace
https://uploads.tapatalk-cdn.com/20200922/d31c8865f1cb99d2fb881950536f0a9c.jpg
Will be posted off once the lacquer is fully hardened.
From finish to start.
Black lacquer and M3 caphead bolts for SME armbase mounting.
https://uploads.tapatalk-cdn.com/20200922/d73df9d9733d88239e8ee908b0cc60b9.jpg
https://uploads.tapatalk-cdn.com/20200922/4d1b778f7a51bad386fbba18e6ce365e.jpg
Etch primer phase. This gives a secure base on the aluminium for the top coats of lacquer.
https://uploads.tapatalk-cdn.com/20200922/0f3a6e4110d108aecafb1599d1d55c0b.jpg
The bare aluminium board. All fitting holes and shaping done
https://uploads.tapatalk-cdn.com/20200922/13a47013cc68f06b00e76fc19a2a357d.jpg
Cut to shape. Alongside the wooden board it will replace
https://uploads.tapatalk-cdn.com/20200922/d31c8865f1cb99d2fb881950536f0a9c.jpg
Will be posted off once the lacquer is fully hardened.