smallangryboy
13-07-2020, 09:35
Up for sale is a recently completed project. Using the HiVi isodynamic (ribbon) tweeters and Seas Er18rnx prestige 6.5" bass drivers. Crossovers use high quality capacitors and air core inductors. Based loosely on the Zaph SR71 and Starling designs.
CNC machined metal feet each about 7kg with grub screws at the back so you can adjust the angle the speakers incline. Designed for a listening position of approximately 2m ~ 2.5m and elevation of 1m.
Cabinets are CNC Valchromat and white melamine faced plywood baffles, assembled and professionally finished. Cabinets are ported and produce prodigious amounts of bass. If you like ribbon tweeters you will probably like the balance of detail and resolution these give without being too analytical.
21cm wide
18cm deep
76cm high
Amplification: 25 W – 100 W per channel
Long term power handling: 80 W
Sensitivity: 85 dB
Nominal impedance: 8 ohms
More than the sum of its parts and near double the cost to make as I'm asking. Too many projects mean these have to go.
[B]Price is £575 or sensible offers collected from Oxfordshire
https://www.avforums.com/attachments/00100lrportrait_00100_burst20200711093515094_cover-jpg.1332501/
https://www.avforums.com/attachments/00100lrportrait_00100_burst20200711093607033_cover-jpg.1332502/
https://www.avforums.com/attachments/00100lrportrait_00100_burst20200711093642735_cover-jpg.1332503/
https://www.avforums.com/attachments/00100lrportrait_00100_burst20200711093652430_cover-jpg.1332504/
https://www.avforums.com/attachments/00100lrportrait_00100_burst20200711093702124_cover-jpg.1332505/
https://www.avforums.com/attachments/00100lrportrait_00100_burst20200711093719123_cover-jpg.1332506/
CNC machined metal feet each about 7kg with grub screws at the back so you can adjust the angle the speakers incline. Designed for a listening position of approximately 2m ~ 2.5m and elevation of 1m.
Cabinets are CNC Valchromat and white melamine faced plywood baffles, assembled and professionally finished. Cabinets are ported and produce prodigious amounts of bass. If you like ribbon tweeters you will probably like the balance of detail and resolution these give without being too analytical.
21cm wide
18cm deep
76cm high
Amplification: 25 W – 100 W per channel
Long term power handling: 80 W
Sensitivity: 85 dB
Nominal impedance: 8 ohms
More than the sum of its parts and near double the cost to make as I'm asking. Too many projects mean these have to go.
[B]Price is £575 or sensible offers collected from Oxfordshire
https://www.avforums.com/attachments/00100lrportrait_00100_burst20200711093515094_cover-jpg.1332501/
https://www.avforums.com/attachments/00100lrportrait_00100_burst20200711093607033_cover-jpg.1332502/
https://www.avforums.com/attachments/00100lrportrait_00100_burst20200711093642735_cover-jpg.1332503/
https://www.avforums.com/attachments/00100lrportrait_00100_burst20200711093652430_cover-jpg.1332504/
https://www.avforums.com/attachments/00100lrportrait_00100_burst20200711093702124_cover-jpg.1332505/
https://www.avforums.com/attachments/00100lrportrait_00100_burst20200711093719123_cover-jpg.1332506/