View Full Version : Lentek pre/power sockets HELP
https://uploads.tapatalk-cdn.com/20200509/de99501b534fbe511f0965a90c9a3b05.jpg
Think I made a boo boo ! I am about to try the lentek as a pre to my quad 909 , I went and pulled the rca jumper thingys off and I don’t know how they were connected!! Left to left or left to right ?
And I presume I’m supposed to connect the pre out to the quad ? Why is there a power amp in ?
https://uploads.tapatalk-cdn.com/20200509/440bc9fca7995040b832e59823360cb5.jpg
Sent from my iPhone using Tapatalk
They only fit one way Andy; you're making a bridge between the preamp and the power amp sections. How you show it is correct.
You can use the Lentek as a pre amp or a power amp. I think you want pre-out from the Lentek, but I am not certain, it is such a while since I tried it.
They only fit one way Andy; you're making a bridge between the preamp and the power amp sections. How you show it is correct.
You can use the Lentek as a pre amp or a power amp. I think you want pre-out from the Lentek, but I am not certain, it is such a while since I tried it.
Geoff to the rescue [emoji1303]
But if using it as a preamp do I need to put a jumper in the power amp RCA’s ?
Sent from my iPhone using Tapatalk
No. You are taking away the link between the pre and power so the latter will not be operating .
Sent from my SM-G930F using Tapatalk
So this is correct? No jumpers
https://uploads.tapatalk-cdn.com/20200509/c7de3dab4fa0ef410f2b24ccfcda3d93.jpg
Sent from my iPhone using Tapatalk
I think so but as I said, I'm not certain of the connection to a power amp.
Sent from my SM-G930F using Tapatalk
If i was connecting a pre to a power amp, that's all I would have.
Sent from my SM-G930F using Tapatalk
Thanks Geoff [emoji1303]
Sent from my iPhone using Tapatalk
Back to being an integrated, twas like unleashing a beast !
Sent from my iPhone using Tapatalk
What do you mean?
Power mate , I know it’s passive and only the quad is in effect driving the speakers but sure it had a lot more Oomph which I don’t need , also the quads power switch is on the back so it means a lot of hassle to switch it on and off as I have it my Hifi in the tv cabinet , before I could reach behind it from the front but with the lentek tank I had no room to do so .
Embarrassingly so the quad is now up for sale .
Sent from my iPhone using Tapatalk
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.