Moode player Wifi

[The Black Adder]

Hi all.

Today I finally got round to install Moode on my Katana dac.

I have always used an Ethernet cable but I've decided to use the on-board WIFI on the Pi3 B+

The thing is, the instructions to enable the WIFI on the moode docs seem to be rather vague to me.

Can anyone give me a walk through?

I currently have it working via Ethernet but just can't figure out the procedure to switch over to WIFI.

Many thanks

[Bourneendboy]

I can't remember exactly how to do this, but I do know you need to follow the instructions in the set up guide to the letter otherwise it won't work.
You can get the set up guide from the Moode website.

[Kit1cat]

Configuration, Network

Set address to DHCP, press SSID scan button, select your network, set Security and enter your WiFi password, set country UK.

Save settings, Pull out your Ethernet cable, reboot pi and you should be up and running.

[The Black Adder]

Configuration, Network

Set address to DHCP, press SSID scan button, select your network, set Security and enter your WiFi password, set country UK.

Save settings, Pull out your Ethernet cable, reboot pi and you should be up and running.

smashing.. Thanks, Barry.

I did most of that correctly but it just didn't work out.

All up and running now.

So, now I'm using Moode are there any options sound wise which are preferable. It's quite different to Volumio in some settings etc.

[The Black Adder]

I can't remember exactly how to do this, but I do know you need to follow the instructions in the set up guide to the letter otherwise it won't work.
You can get the set up guide from the Moode website.

It does, but it has different step descriptions to what's on my version of moode. I've not used moode in years so I'm not familiar with the legacy settings.

[Kit1cat]

I find the default settings work best for me plus the following tweaks.

https://github.com/dynobot/Linux-Audio-Adjustments

Don't forget the Moode forum

http://moodeaudio.org/forum/index.php