mikeyb
16-04-2020, 11:18
I have for sale a heavily modded Technics 1210 MK5 Turntable that includes the following.
Technics 1210 MK5 deck
Paul Hynes SR7-21/27 EHD Power Supply
1 x Paul Hynes internal Power Regulator
1x Ian Mac internal Power Regulator
Mike New Bearing
Mike New Platter MK1 metal version
Funk Firm Achromat (5mm)
Isonoe Feet
The tonearm, headshell and cartridge are NOT FOR SALE (yet).
The armboard currently fitted will only do for a Fidelity Research FR64 tonearm so unless you have that arm then I'll be selling the armboard separately. So essentially you will need to source one to fit your tonearm of choice before the deck can be used. I recommend Steve at Magna Audio [emoji6]
Deck itself is in very good condition with only one or two light marks on it that have been retouched ( not by me ) and are a pretty good match for the original colour.
Underneath you will see where I've had to cut away some of the rubber base to accommodate the Fidelity arm, this of course can't be seen when in use and if you're really bothered about it, replacements can be bought off eBay for around £25-30.
Price for the package listed above is:
I think the last modded 1210 that came up for sale here was advertised at considerably more so I think this is a very good price, but then again I would [emoji23]
If you would like to buy it WITHOUT the Mike New Platter, Achromat and Mike New Bearing then I can refit the original platter with the original rubber mat and original bearing which would make the package...
I won't split the deck and power supply as it and the regulators are hard wired into the board and would mean fitting another board and PSU bits to the deck which is too much hassle.
Any questions or more photos wanted just ask.
Tony and Brian ( Scottish Mafia ) have both heard this deck and were pretty impressed, I don't think you'll be disappointed [emoji6]
https://uploads.tapatalk-cdn.com/20200416/db2bf2bd1583c6170de6f07a0bfbbda0.jpg
https://uploads.tapatalk-cdn.com/20200416/04e3927764c058b7b0649778ecac07c0.jpg
https://uploads.tapatalk-cdn.com/20200416/70cdc53c4f1fabdaf46384cb2195ca89.jpg
https://uploads.tapatalk-cdn.com/20200416/59726b1f7260116b445e08cceb958bd7.jpg
https://uploads.tapatalk-cdn.com/20200416/f488da2c0e21429215025f535a1f564e.jpg
https://uploads.tapatalk-cdn.com/20200416/3461b1e3300415d1f6a89c67ca73a8a0.jpg
https://uploads.tapatalk-cdn.com/20200416/e87ea5afb227452e05bfd053077a2dd0.jpg
https://uploads.tapatalk-cdn.com/20200416/c54a894359e2e9a5255d75c3e44d07d7.jpg
https://uploads.tapatalk-cdn.com/20200416/f856b8424465bb97c4c50bcea4a69d88.jpg
Technics 1210 MK5 deck
Paul Hynes SR7-21/27 EHD Power Supply
1 x Paul Hynes internal Power Regulator
1x Ian Mac internal Power Regulator
Mike New Bearing
Mike New Platter MK1 metal version
Funk Firm Achromat (5mm)
Isonoe Feet
The tonearm, headshell and cartridge are NOT FOR SALE (yet).
The armboard currently fitted will only do for a Fidelity Research FR64 tonearm so unless you have that arm then I'll be selling the armboard separately. So essentially you will need to source one to fit your tonearm of choice before the deck can be used. I recommend Steve at Magna Audio [emoji6]
Deck itself is in very good condition with only one or two light marks on it that have been retouched ( not by me ) and are a pretty good match for the original colour.
Underneath you will see where I've had to cut away some of the rubber base to accommodate the Fidelity arm, this of course can't be seen when in use and if you're really bothered about it, replacements can be bought off eBay for around £25-30.
Price for the package listed above is:
I think the last modded 1210 that came up for sale here was advertised at considerably more so I think this is a very good price, but then again I would [emoji23]
If you would like to buy it WITHOUT the Mike New Platter, Achromat and Mike New Bearing then I can refit the original platter with the original rubber mat and original bearing which would make the package...
I won't split the deck and power supply as it and the regulators are hard wired into the board and would mean fitting another board and PSU bits to the deck which is too much hassle.
Any questions or more photos wanted just ask.
Tony and Brian ( Scottish Mafia ) have both heard this deck and were pretty impressed, I don't think you'll be disappointed [emoji6]
https://uploads.tapatalk-cdn.com/20200416/db2bf2bd1583c6170de6f07a0bfbbda0.jpg
https://uploads.tapatalk-cdn.com/20200416/04e3927764c058b7b0649778ecac07c0.jpg
https://uploads.tapatalk-cdn.com/20200416/70cdc53c4f1fabdaf46384cb2195ca89.jpg
https://uploads.tapatalk-cdn.com/20200416/59726b1f7260116b445e08cceb958bd7.jpg
https://uploads.tapatalk-cdn.com/20200416/f488da2c0e21429215025f535a1f564e.jpg
https://uploads.tapatalk-cdn.com/20200416/3461b1e3300415d1f6a89c67ca73a8a0.jpg
https://uploads.tapatalk-cdn.com/20200416/e87ea5afb227452e05bfd053077a2dd0.jpg
https://uploads.tapatalk-cdn.com/20200416/c54a894359e2e9a5255d75c3e44d07d7.jpg
https://uploads.tapatalk-cdn.com/20200416/f856b8424465bb97c4c50bcea4a69d88.jpg