Audio Technica ATP12T 10.5in tonearm

[Slammed56]

I’ve had this arm sitting about for a while now so decided yesterday since I now have plenty of free time to set it up for mono (SPU) duties on my Dais
Everything went well until I got to mounting the SPU ,the Azimuth is out of line slightly :scratch:
Obviously there’s no azimuth adjustments on the SPU but I did notice 2 tiny screws right at the end of the arm wand and wonder if that is what these are for ?
They seem really tight so I thought I’d ask if anyone has been in the similar position with one of these broadcast arms

[Shovel_Knight]

Yes, you can adjust the azimuth if you slacken these screws. At least this is true for AT-1503 which seems to be the same arm for all intents and purposes. But they are very tight indeed. I almost stripped one of them on my tonearm.

[Slammed56]

Yes, you can adjust the azimuth if you slacken these screws. At least this is true for AT-1503 which seems to be the same arm for all intents and purposes. But they are very tight indeed. I almost stripped one of them on my tonearm.

Thanks Pavel
Managed to loosen one but the other is very very tight , don’t want to strip it

[Shovel_Knight]

Try to gently heat it with a hair dryer.