PDA

View Full Version : power supply plug



diviy
15-12-2019, 01:35
I have a tc7510 with a little pinkie power supply the plug that is fitted is 2.1mm or 2.5mm but I now have a tc7530dc that has a tiny sized plug does anyone know if I can get a plug adapter for it or even know what the tc7530dc plug size is ?

Mr Neds
16-12-2019, 18:09
Think I got an adaptor on eBay for a wrong size plug- didn’t know you could buy them until I looked! I’m sure someone will be along to tell you what size you need, as they vary by quite small increments

Stratmangler
16-12-2019, 18:34
I have a tc7510 with a little pinkie power supply the plug that is fitted is 2.1mm or 2.5mm but I now have a tc7530dc that has a tiny sized plug does anyone know if I can get a plug adapter for it or even know what the tc7530dc plug size is ?

Why don't you PM Stan?
He'll be able to tell you off the top of his head.

struth
16-12-2019, 18:59
You can buy adaptor sets. Look on bay or amazon. Standard main size is 5,5mm outet.2.1mm inner.
I've bought a few sets and between them I can usually fit most things

StanleyB
16-12-2019, 21:05
I have a tc7510 with a little pinkie power supply the plug that is fitted is 2.1mm or 2.5mm but I now have a tc7530dc that has a tiny sized plug does anyone know if I can get a plug adapter for it or even know what the tc7530dc plug size is ?
If you have the original TC-7510 power supply, which is the one that doesn't have a separate figure of eight mainslead, then I would not use it on the TC-7530DC. The TC-7510 original PSU is a lot noisier, and it tends not to be able to handle the switch on load of the TC-7530DC.

If you are in the UK and you have a figure of eight mains lead lying about, I can let you have the correct power supply for the TC-7530DC for a tenner posted.

The TC-7530DC DC socket uses a 2.1mm plug

diviy
19-12-2019, 03:30
Is your pwer supply better than a rock ghrotto little pinkie power supply ?

Theadmans
19-12-2019, 19:26
Hi Gerald - I also have a Little Pinkie - but it is AC for my Musical Fidelity X10D....

..just make sure your Little Pinkie is DC for the Bushmaster and then ask Stan for the correct dimensions.

Little Pinkie will be high quality - but I stress it needs to be DC not AC.

diviy
21-12-2019, 00:12
Hi Adam it is a 12volt dc that run`s my bushmaster tc7510 at the moment

Theadmans
21-12-2019, 20:09
Good stuff I'd go with the Pinkie then - just need to get the right dimensions for the adapter. Ask Mike at Rock Grotto and Stan and job's a good un.

Theadmans
22-12-2019, 18:52
Gerald - I think I have the adapter you need.

Message me with your address and I'll send it to you for free.