AJSki2fly
03-11-2019, 15:00
Due to an unexpected small windfall, I am in a position to treat myself to a new Turntable and Sue has agreed, she is buying a green house and some other bits for herself. :)
So my Voyd the Voyd turntable is up for sale, currently with the JELCO TK850K 10" Arm fitted using the Easy VTA collar/mount, this set up is excellent and works extremely well, and is shown in the photos. I will be sad to see it go as it is such a great TT and the arm with it is superb, but the funds from it will go towards my new purchase and I cannot have everything.
I also have an Ammonite collar which is quite an improvement on the standard boss as shown in the photo next it, the Ammonite boss holds the arm much better and makes for easier VTA adjustment, but is nowhere near as simple as with the EasyVTA.
So let's give you some info on the turntable. I purchased it from a very reputable dealer in Denmark in April 2019 who had taken it in PX from the original owner. It is in superb condition and has been extremely well cared for all of its life, there are two small marks on the plinth as show in the photos. The perspex cover is like new and is virtually unmarked.
The Voyd the Voyd is a 3 motor belt driven TT running at 14 volts from the Split Phase power supply, this design ensures the platter runs very accurately with hardly any wow/flutter and having the belt touching and driving the platter at 3 points gives it great stability. The platter/chassis is suspended on 3 springs underneath and it is simple to adjust these and get the platter level in conjunction with the arm used and a suitable record weight, if used. Once set up it is very stable and needs no adjustment. The turntable runs near silent as the motors are extremely quiet and cannot be heard.
The JELCO TK850M 10" arm is in my opinion superb, purchased new in May 2019, and is still in mint condition, it is great VFM and out performs many other arms at many times the cost. In fact it tried it out only as I wanted to experience a 10" arm and was recommended it, and this resulted in me selling my SME IV arm as I felt the JELCO performed easily as well on the Voyd.
How it sounds, the turntable is what I would call a natural and musical sounding TT, it does very good bass and has a great mid range and detailed top end, and gives a very good soundstage and sense of depth. Certainly with this arm and various cartridges, I have tried Ortofon Rondo Blue, Hana SL, Phasemation PP-300, Michell Cusis(Benz Micro Wood S) and Benz Micro LP-S. In all cases the TT and arm worked very well, obviously each cartridge has its own sound signature, but the TT and arm combo allowed them to shine IMO.
Initially I upgraded to the Ammonite collar for the JELCO and this is well worthing having over the standard one, when I went to a better cartridge and second head shell I purchased the EasyVTA boss, this make setting up and changing cartridges a much easier task and very accurate, making finding the sweet spot much easier to do.
So if you are looking for a great TT and arm this is what I am asking for it, I would prefer to sell the Voyd with the JELCO arm together and I think any purchaser would be very pleased with it, but I am willing to split it. You can have some or all the other components as priced below, if you decide to have all then I will consider a discount. Basically I am just looking for what I paid for the TT and a sensible price for the other items
Voyd the Voyd turnable with The Voyd PSU - Split Phase Power supply and cable and 3 belt(2 new) - £1200
JELCO TK850M 10" arm - £700
Ammonite JELCO collar - £40
EasyVTA collar - £100 (retail £149) - I purchased new in June 2019
SME Ebony arm board for Voyd manufactured by Magna Audio - £80
If you purchase the Voyd with the JELCO arm then it will come with the Ebony arm board that is is mounted on as shown in the photo at no additional cost.
Voyd with standard JELCO set up is £1900
Voyd with JELCO and Ammonite collar is £1940
Voyd with JELCO and EasyVTA is £2000
You obviously can purchase everything if you so wish.
I would recommend collection of the turntable from my home although I am willing to travel up to 150 miles from Seaton in Devon to meet a purchaser, but I would ask payment in advance for me to make this commitment. I am more than happy for you to come to my home and hear it working in its glory, it will be left set up and ready to demonstrate, but if the JELCO is sold then I will be unable to demo it.
Should you insist on the Turntable being sent by courier to you then I am willing to do so but this would be at your own risk. I would package it extremely carefully as it was when sent to me from DK and would be double boxed. I would advise on UPS cost including insurance cover once packaged.
P&P of other items will be advise at purchase.
I have taken as clear as possible photos below, if you have any questions please PM me.
https://i.postimg.cc/pTw1stQq/F0-E00592-AA6-F-4-BDF-AD7-E-80-FF65-DA4504.jpg (https://postimg.cc/jwhXjmF7)
https://i.postimg.cc/MKygrXFR/D5-D3-C76-D-0262-4-B62-9916-C881230-DB59-C.jpg (https://postimg.cc/SJxZnQqN)
https://i.postimg.cc/Gp97rpqX/040-F6232-D0-CC-4-BB5-833-E-7693-F809-C72-E.jpg (https://postimg.cc/XZScknM5)
https://i.postimg.cc/7hzj4LPF/36951401-B3-E6-4-E16-979-A-B02-AECBF2832.jpg (https://postimg.cc/RJMgQ4Hd)
https://i.postimg.cc/1zWkcTYj/BCD618-FE-1-FA9-43-EC-A117-6-E349-B11-B83-B.jpg (https://postimg.cc/WDkYs9VG)
https://i.postimg.cc/02gLf7cP/7-F693-FAE-8-DE6-48-EB-B6-C5-7-C43-B63-D0-FBA-1-201-a.jpg (https://postimg.cc/c6m91gpb)
https://i.postimg.cc/NM5WN43f/467-ED3-AC-557-E-4-DE1-8-F89-21691-DC58530.jpg (https://postimg.cc/Hc1ZnQWf)
https://i.postimg.cc/g0k9hd4h/CD1526-F3-FF5-E-4502-8833-A6928-E303028-1-201-a.jpg (https://postimg.cc/FYqntMMF)
https://i.postimg.cc/XYsHT5cZ/F40-E37-DB-01-CA-4560-ACE5-FD9-BA1-E91555.jpg (https://postimg.cc/75TnzfRD)
https://i.postimg.cc/50CsYRcv/0-AEEFF61-9-F3-C-41-D2-8-F02-BB8-AD6-D09867.jpg (https://postimg.cc/jwRHBvSd)
https://i.postimg.cc/qB2mpSxH/45-D8-BDBB-B871-4-F58-AE5-A-8-BE880-E1-D1-A3.jpg (https://postimg.cc/qgMcLmF1)
https://i.postimg.cc/mrqdrGnB/F27-A0-F5-D-F3-FA-45-F2-A33-C-2250-ADC44612.jpg (https://postimg.cc/Ny68NZYz)
https://i.postimg.cc/xTY6856J/EEA413-FD-1-E49-43-B2-AB2-E-46-CCABB28-A22.jpg (https://postimg.cc/dDH2S2Pw)
https://i.postimg.cc/rFJQr4Hh/DF01-F7-F2-732-F-4514-AEEB-A1-E224-C725-D6.jpg (https://postimg.cc/WhdGRdTr)
https://i.postimg.cc/SRLVVYxx/6-FE86-F6-B-5-B17-41-D9-A863-032-D9-D0-DFEA7.jpg (https://postimg.cc/4HdzxdcD)
https://i.postimg.cc/90HJGYVk/6-BD5-FDCD-8-D5-F-49-E3-961-E-D2-EB9-DC21067.jpg (https://postimg.cc/ft5csXV7)
SME Ebony arm board top, this positions and 9" SME arm very accurately
https://i.postimg.cc/wj42WpgL/ACD021-C9-A2-FE-4-AC2-8505-31337-F4-F2-B09.jpg (https://postimg.cc/gxR3J1w2)
bottom view showing threaded inserts for arm bas fixing bolts
https://i.postimg.cc/XvZ8mzYh/0-E0-F3-A51-F024-4725-8-C03-926646498-F55.jpg (https://postimg.cc/VS8nb4MB)
So my Voyd the Voyd turntable is up for sale, currently with the JELCO TK850K 10" Arm fitted using the Easy VTA collar/mount, this set up is excellent and works extremely well, and is shown in the photos. I will be sad to see it go as it is such a great TT and the arm with it is superb, but the funds from it will go towards my new purchase and I cannot have everything.
I also have an Ammonite collar which is quite an improvement on the standard boss as shown in the photo next it, the Ammonite boss holds the arm much better and makes for easier VTA adjustment, but is nowhere near as simple as with the EasyVTA.
So let's give you some info on the turntable. I purchased it from a very reputable dealer in Denmark in April 2019 who had taken it in PX from the original owner. It is in superb condition and has been extremely well cared for all of its life, there are two small marks on the plinth as show in the photos. The perspex cover is like new and is virtually unmarked.
The Voyd the Voyd is a 3 motor belt driven TT running at 14 volts from the Split Phase power supply, this design ensures the platter runs very accurately with hardly any wow/flutter and having the belt touching and driving the platter at 3 points gives it great stability. The platter/chassis is suspended on 3 springs underneath and it is simple to adjust these and get the platter level in conjunction with the arm used and a suitable record weight, if used. Once set up it is very stable and needs no adjustment. The turntable runs near silent as the motors are extremely quiet and cannot be heard.
The JELCO TK850M 10" arm is in my opinion superb, purchased new in May 2019, and is still in mint condition, it is great VFM and out performs many other arms at many times the cost. In fact it tried it out only as I wanted to experience a 10" arm and was recommended it, and this resulted in me selling my SME IV arm as I felt the JELCO performed easily as well on the Voyd.
How it sounds, the turntable is what I would call a natural and musical sounding TT, it does very good bass and has a great mid range and detailed top end, and gives a very good soundstage and sense of depth. Certainly with this arm and various cartridges, I have tried Ortofon Rondo Blue, Hana SL, Phasemation PP-300, Michell Cusis(Benz Micro Wood S) and Benz Micro LP-S. In all cases the TT and arm worked very well, obviously each cartridge has its own sound signature, but the TT and arm combo allowed them to shine IMO.
Initially I upgraded to the Ammonite collar for the JELCO and this is well worthing having over the standard one, when I went to a better cartridge and second head shell I purchased the EasyVTA boss, this make setting up and changing cartridges a much easier task and very accurate, making finding the sweet spot much easier to do.
So if you are looking for a great TT and arm this is what I am asking for it, I would prefer to sell the Voyd with the JELCO arm together and I think any purchaser would be very pleased with it, but I am willing to split it. You can have some or all the other components as priced below, if you decide to have all then I will consider a discount. Basically I am just looking for what I paid for the TT and a sensible price for the other items
Voyd the Voyd turnable with The Voyd PSU - Split Phase Power supply and cable and 3 belt(2 new) - £1200
JELCO TK850M 10" arm - £700
Ammonite JELCO collar - £40
EasyVTA collar - £100 (retail £149) - I purchased new in June 2019
SME Ebony arm board for Voyd manufactured by Magna Audio - £80
If you purchase the Voyd with the JELCO arm then it will come with the Ebony arm board that is is mounted on as shown in the photo at no additional cost.
Voyd with standard JELCO set up is £1900
Voyd with JELCO and Ammonite collar is £1940
Voyd with JELCO and EasyVTA is £2000
You obviously can purchase everything if you so wish.
I would recommend collection of the turntable from my home although I am willing to travel up to 150 miles from Seaton in Devon to meet a purchaser, but I would ask payment in advance for me to make this commitment. I am more than happy for you to come to my home and hear it working in its glory, it will be left set up and ready to demonstrate, but if the JELCO is sold then I will be unable to demo it.
Should you insist on the Turntable being sent by courier to you then I am willing to do so but this would be at your own risk. I would package it extremely carefully as it was when sent to me from DK and would be double boxed. I would advise on UPS cost including insurance cover once packaged.
P&P of other items will be advise at purchase.
I have taken as clear as possible photos below, if you have any questions please PM me.
https://i.postimg.cc/pTw1stQq/F0-E00592-AA6-F-4-BDF-AD7-E-80-FF65-DA4504.jpg (https://postimg.cc/jwhXjmF7)
https://i.postimg.cc/MKygrXFR/D5-D3-C76-D-0262-4-B62-9916-C881230-DB59-C.jpg (https://postimg.cc/SJxZnQqN)
https://i.postimg.cc/Gp97rpqX/040-F6232-D0-CC-4-BB5-833-E-7693-F809-C72-E.jpg (https://postimg.cc/XZScknM5)
https://i.postimg.cc/7hzj4LPF/36951401-B3-E6-4-E16-979-A-B02-AECBF2832.jpg (https://postimg.cc/RJMgQ4Hd)
https://i.postimg.cc/1zWkcTYj/BCD618-FE-1-FA9-43-EC-A117-6-E349-B11-B83-B.jpg (https://postimg.cc/WDkYs9VG)
https://i.postimg.cc/02gLf7cP/7-F693-FAE-8-DE6-48-EB-B6-C5-7-C43-B63-D0-FBA-1-201-a.jpg (https://postimg.cc/c6m91gpb)
https://i.postimg.cc/NM5WN43f/467-ED3-AC-557-E-4-DE1-8-F89-21691-DC58530.jpg (https://postimg.cc/Hc1ZnQWf)
https://i.postimg.cc/g0k9hd4h/CD1526-F3-FF5-E-4502-8833-A6928-E303028-1-201-a.jpg (https://postimg.cc/FYqntMMF)
https://i.postimg.cc/XYsHT5cZ/F40-E37-DB-01-CA-4560-ACE5-FD9-BA1-E91555.jpg (https://postimg.cc/75TnzfRD)
https://i.postimg.cc/50CsYRcv/0-AEEFF61-9-F3-C-41-D2-8-F02-BB8-AD6-D09867.jpg (https://postimg.cc/jwRHBvSd)
https://i.postimg.cc/qB2mpSxH/45-D8-BDBB-B871-4-F58-AE5-A-8-BE880-E1-D1-A3.jpg (https://postimg.cc/qgMcLmF1)
https://i.postimg.cc/mrqdrGnB/F27-A0-F5-D-F3-FA-45-F2-A33-C-2250-ADC44612.jpg (https://postimg.cc/Ny68NZYz)
https://i.postimg.cc/xTY6856J/EEA413-FD-1-E49-43-B2-AB2-E-46-CCABB28-A22.jpg (https://postimg.cc/dDH2S2Pw)
https://i.postimg.cc/rFJQr4Hh/DF01-F7-F2-732-F-4514-AEEB-A1-E224-C725-D6.jpg (https://postimg.cc/WhdGRdTr)
https://i.postimg.cc/SRLVVYxx/6-FE86-F6-B-5-B17-41-D9-A863-032-D9-D0-DFEA7.jpg (https://postimg.cc/4HdzxdcD)
https://i.postimg.cc/90HJGYVk/6-BD5-FDCD-8-D5-F-49-E3-961-E-D2-EB9-DC21067.jpg (https://postimg.cc/ft5csXV7)
SME Ebony arm board top, this positions and 9" SME arm very accurately
https://i.postimg.cc/wj42WpgL/ACD021-C9-A2-FE-4-AC2-8505-31337-F4-F2-B09.jpg (https://postimg.cc/gxR3J1w2)
bottom view showing threaded inserts for arm bas fixing bolts
https://i.postimg.cc/XvZ8mzYh/0-E0-F3-A51-F024-4725-8-C03-926646498-F55.jpg (https://postimg.cc/VS8nb4MB)