DVD repair in east Kent any reccomendations ?

[Discopants]

I bought an Arcam DV137 player from a member here recently, however after a week in my posession its developed a fault where its blowing one of the internal fuses. Ive replaced the fuse but it popped on power up.

There is no obvious (to me) issues with the boards , certainly no obvious blow caps.

Hopefully this is a viable repair but wondering if any members can reccomend a local repairer or if there are any amateur electronic enthusiasts that fancy taking a look over it?

Thanks in advance.

Martin

Ps im in Deal East Kent , thanet and canterbury and Dover i go to regularly.

[Mixc]

If you so inclined and you have a multi meter, with the power off check the rectifier diodes for a short circuit.

Page 8 of the pdf

https://elektrotanya.com/arcam_dv137_sch.pdf/download.html

Good luck.

[Discopants]

If you so inclined and you have a multi meter, with the power off check the rectifier diodes for a short circuit.

Page 8 of the pdf

https://elektrotanya.com/arcam_dv137_sch.pdf/download.html

Good luck.


Argh that may as well be the Tokyo train map to.me. in Swahili....

[paulf-2007]

I bought an Arcam DV137 player from a member here recently, however after a week in my posession its developed a fault where its blowing one of the internal fuses. Ive replaced the fuse but it popped on power up.

There is no obvious (to me) issues with the boards , certainly no obvious blow caps.

Hopefully this is a viable repair but wondering if any members can reccomend a local repairer or if there are any amateur electronic enthusiasts that fancy taking a look over it?

Thanks in advance.

Martin

Ps im in Deal East Kent , thanet and canterbury and Dover i go to regularly.i know a great tech guy in Chatham, nothing seems to phase him, not expensive, you could phone him and get an idea of what to do.