fordy
14-02-2019, 20:05
For sale is a lovely example of the Goldring 88. I've owned this for about 10 years. The deck is running well having been fettIed again recently with a re-greased motor and re-lubricated bearing. The bearing was upgraded to a ceramic ball running on a PTFE thrust pad some years ago which gives very low friction. This motor unit is lovely and works well. The platter mat has seen better days but I always used it with a white Funk Firm Achromat to great effect.
The plinth is a multilayer birch ply construction set up for 2 arms (9" to 10") . I ran many arms on this over the years from Rega's and Linn's to Jelco's and even a Spacearm. I will include a piece of correct birch ply for making fresh armboards (easy to do) and will include the various ones I made over the years (2x Rega, 1x Linn, 1xADC). The two on at the moment are both for Jelco SA-375h (Sumiko MMT) at Rega geometry.
I'm loath to sell this one as its such a lovely combo but it was superseded in my system some time ago and space is getting tight. I really need to stop hoarding!
I can't post this as the plinth is really very heavy with the Lenco atop and I can't find the motor transport screws at the moment. I'd suggest pickup from near Chester. £350 collected.
https://i.postimg.cc/0yY1bPNf/A1-C58-AF0-D8-C4-4-EAA-AAF8-7-C0-A7-AA249-ED.jpg (https://postimg.cc/G4m5f0G8)
https://i.postimg.cc/J7FLFpgb/3757007-E-9-D04-468-B-8173-4-F6-C46-B1-B98-C.jpg (https://postimg.cc/qg2ShxpR)
https://i.postimg.cc/05Kk9g7t/BFCFE57-E-BA4-B-42-C7-86-F1-281-B5-C27-B73-F.jpg (https://postimg.cc/LhRKVbCf)
https://i.postimg.cc/vZbb7ckj/41-C75-E6-B-FEF9-4-D2-C-AF78-96-AA12319-FE6.jpg (https://postimg.cc/jLgptdsQ)
https://i.postimg.cc/ZKhSZWbR/205-B6534-F3-B8-4880-88-AF-AA7-AC92-C7389.jpg (https://postimg.cc/SjV5fNzF)
https://i.postimg.cc/QxkrMjCq/894-CC2-A4-86-F8-4-F42-8310-4-EC137-AA2907.jpg (https://postimg.cc/svXL6dpB)
https://i.postimg.cc/WzGxt7N4/08110-F57-F37-D-4-B32-B4-E7-BDC8519536-C8.jpg (https://postimg.cc/2L50KhBp)
https://i.postimg.cc/rsXv8HLb/8-FE013-F6-AB0-C-4-A45-A39-F-9577308-D519-D.jpg (https://postimg.cc/ZBHfHVnF)
https://i.postimg.cc/NMr3vcZm/D174-DD5-B-2349-4-D09-9-F25-6193098013-D3.jpg (https://postimg.cc/ZB4761b5)
The plinth is a multilayer birch ply construction set up for 2 arms (9" to 10") . I ran many arms on this over the years from Rega's and Linn's to Jelco's and even a Spacearm. I will include a piece of correct birch ply for making fresh armboards (easy to do) and will include the various ones I made over the years (2x Rega, 1x Linn, 1xADC). The two on at the moment are both for Jelco SA-375h (Sumiko MMT) at Rega geometry.
I'm loath to sell this one as its such a lovely combo but it was superseded in my system some time ago and space is getting tight. I really need to stop hoarding!
I can't post this as the plinth is really very heavy with the Lenco atop and I can't find the motor transport screws at the moment. I'd suggest pickup from near Chester. £350 collected.
https://i.postimg.cc/0yY1bPNf/A1-C58-AF0-D8-C4-4-EAA-AAF8-7-C0-A7-AA249-ED.jpg (https://postimg.cc/G4m5f0G8)
https://i.postimg.cc/J7FLFpgb/3757007-E-9-D04-468-B-8173-4-F6-C46-B1-B98-C.jpg (https://postimg.cc/qg2ShxpR)
https://i.postimg.cc/05Kk9g7t/BFCFE57-E-BA4-B-42-C7-86-F1-281-B5-C27-B73-F.jpg (https://postimg.cc/LhRKVbCf)
https://i.postimg.cc/vZbb7ckj/41-C75-E6-B-FEF9-4-D2-C-AF78-96-AA12319-FE6.jpg (https://postimg.cc/jLgptdsQ)
https://i.postimg.cc/ZKhSZWbR/205-B6534-F3-B8-4880-88-AF-AA7-AC92-C7389.jpg (https://postimg.cc/SjV5fNzF)
https://i.postimg.cc/QxkrMjCq/894-CC2-A4-86-F8-4-F42-8310-4-EC137-AA2907.jpg (https://postimg.cc/svXL6dpB)
https://i.postimg.cc/WzGxt7N4/08110-F57-F37-D-4-B32-B4-E7-BDC8519536-C8.jpg (https://postimg.cc/2L50KhBp)
https://i.postimg.cc/rsXv8HLb/8-FE013-F6-AB0-C-4-A45-A39-F-9577308-D519-D.jpg (https://postimg.cc/ZBHfHVnF)
https://i.postimg.cc/NMr3vcZm/D174-DD5-B-2349-4-D09-9-F25-6193098013-D3.jpg (https://postimg.cc/ZB4761b5)