RFI mains Filter - will this work?

[Barwell1992]

Hi all,

As per my other thread I'm building a 12v trigger unit to switch on two power/mono block Amps from two independent 12v trigger sources, I'd like to build in a RFI filter on the power output side of the switch.

I'm looking to use this Schaffner FN2030 Series 20A 250 V ac 400Hz Flange Mount RFI Filter to feed the two IEC outputs, can anyone see why this won't work/would be dangerous? Each power amp draws around 3.3A but i've chosen 20A as that's the same rating of the solid state relay.

Link: https://uk.rs-online.com/web/p/power-line-filters/0292925/
Technical spec: https://docs-emea.rs-online.com/webdocs/153c/0900766b8153cfe6.pdf

25280

Any help appreciated.

Thanks
Dan

[Jazid]

I'm not up on the regs but might it be prudent to switch both live and neutral with the relay?

Sent from my BLA-L09 using Tapatalk

[Barwell1992]

I'm not up on the regs but might it be prudent to switch both live and neutral with the relay?

Sent from my BLA-L09 using Tapatalk

Seems like it’s not part of the regs from what I can find, I will have a better look into it, not that easy to implement without a second relay.