PDA

View Full Version : Trans-Fi Salvation t/t and Terminator T3 Pro Tonearm



shaman
11-12-2018, 20:15
I am now retired and it's time to have a clear out to simplify my life.
Too much gear....you know how it is!
This is the acrylic platter version as can be seen in the photos.
Plinth is slate with substantial adjustable feet for levelling.
The Terminator Tonearm is an air bearing parallel tracker suitable for most cartridges. It has on the fly vta adjustment. Comes with the Tomahawk arm wand and I also have three earlier version arm wands.
The rim drive is provided by a Teres Verus which cost £1000. It comes with the manual and supports 33, 45 and 78 speeds. There is a slight noise from the unit which does not affect performance in any way.
Everything you need is here including the pump and expansion tank.
All items are in excellent condition and had light use in my custodianship. I am the original owner.
These are quite rare on the second hand market which is testament to their quality. No longer being made as Vic has retired now. Lots of detail on www.trans-fi.com
Not suitable for posting so pick up from Mid Wales or I am prepared to meet up within an hours drive if the buyer is willing to meet my petrol cost.
Bargain at £1400
https://uploads.tapatalk-cdn.com/20181211/1f86969900237f46dbf50e85fdf46291.jpghttps://uploads.tapatalk-cdn.com/20181211/f99948a8b5032c802240830a96169ace.jpghttps://uploads.tapatalk-cdn.com/20181211/6c211a9a8d98147b20843a8f6b0e9d96.jpghttps://uploads.tapatalk-cdn.com/20181211/6ccf3680e87af03b033fd4f5f3e7761f.jpghttps://uploads.tapatalk-cdn.com/20181211/55105f021d20256ea821f10d35c0839c.jpghttps://uploads.tapatalk-cdn.com/20181211/7bd118edb1d4d32bcdae0fa00363f3b0.jpghttps://uploads.tapatalk-cdn.com/20181211/9dfbaa1d826a584f97e96ba14374084a.jpghttps://uploads.tapatalk-cdn.com/20181211/905dc27c207e3da57366f219b9d1f157.jpgcost.

shaman
13-12-2018, 11:48
I would consider selling the Terminator arm separately for £450 if anyone is just interested in the arm.
I can use the other parts in future projects.
Thanks!

Dmitry
13-12-2018, 15:29
I would consider selling the Terminator arm separately for £450 if anyone is just interested in the arm.
I can use the other parts in future projects.
Thanks!

Hi Nigel,
I'm interested in your Terminator tonearm.
Please Message me, I can't figure out how to do it.
Thanks!

shaman
14-12-2018, 14:53
Hi Nigel,
I'm interested in your Terminator tonearm.
Please Message me, I can't figure out how to do it.
Thanks!

Email sent Dimitry!

Dmitry
15-12-2018, 00:11
I didn't get it. Here's my address - dzgddsATyahoodotcom
Thanks!

fredmartin
22-12-2018, 04:28
Hi Nigel, did you sell the tonearm to dmitry ? I was very interested in it as well if things went awry

best regards,

fred

shaman
22-12-2018, 08:24
[QUOTE=fredmartin;1042694]Hi Nigel, did you sell the tonearm to dmitry ? I was very interested in it as well if things went awry

best regards,

fred
Hello Fred,
Dmitry is deciding between my arm and buying a new set up from the guy who now makes them in Russia.
I understand that you can buy an updated carbon version of the Tomahawk wand for 130 euros from him.
I'll send you a PM as soon as Dmitry has made a decision.
Thanks for your interest.
This is where you can find details of the current production.

https://www.musicfromvinyl.shop/

Pigmy Pony
22-12-2018, 09:37
Dmitry and Fred, you guys may need one or two more posts before you can pm.

Oh and Merry Christmas!

Macca
22-12-2018, 09:43
You need to have made 5 posts before you can PM.


The Terminator arm is superb btw, £450 is a massive bargain.

topoxforddoc
22-12-2018, 10:34
PM sent

shaman
23-12-2018, 16:53
Tonearm now sold to Dimitry

shaman
23-12-2018, 22:53
Verus now sold as well

Bigman80
23-12-2018, 23:46
Well done Nigel.