graham67
27-11-2018, 15:48
Hi,
Am looking at getting an armboard made up for my SL 150. To assist Steve, I need to determine the depth of the armboard height.
I was assuming the height dimensions (i.e. top of platter relative to plinth/armboard cut-out) are same or similar to a 1210. However one thing I have learned is that it is best not to assume anything!!!
I will of course do some measurements and try to work it out however if anyone has done this before with a SL-150 (or 1300/1400/1500 dimensions) any advice much appreciated.
Graham
Am looking at getting an armboard made up for my SL 150. To assist Steve, I need to determine the depth of the armboard height.
I was assuming the height dimensions (i.e. top of platter relative to plinth/armboard cut-out) are same or similar to a 1210. However one thing I have learned is that it is best not to assume anything!!!
I will of course do some measurements and try to work it out however if anyone has done this before with a SL-150 (or 1300/1400/1500 dimensions) any advice much appreciated.
Graham