Recommendation for SUPER SUPER strong double sided tape.

[Wakefield Turntables]

I was thinking along the lines of carpet tape but if any of you have any ideas I would welcome them.

[andyrlb]

I was thinking along the lines of carpet tape but if any of you have any ideas I would welcome them.

I find that all the gorilla glue products tend to do what it says on tin [emoji1303]
They do a double sided tape too


Sent from my iPhone using Tapatalk

[sq225917]

What do you want to stick, 3M does lots of material specific tapes. I have some 3M tape on 0.5mm foam if that's any good for your needs. Little bit of shear damping when used, great between heavy flat items.

[Sherwood]

https://www.vikingtapes.co.uk/products/3m-rp25-heavy-duty-double-sided-tape-19mm-x-3m-x-0-6mm?utm_medium=cpc&utm_source=googlepla&variant=34690082439&gclid=EAIaIQobChMIyPvd5ba73QIVD-R3Ch1MTwSWEAQYASABEgLYo_D_BwE

Fantastic stuff

[Edward]

I find that all the gorilla glue products tend to do what it says on tin [emoji1303]
They do a double sided tape too


Sent from my iPhone using Tapatalk+1

§

[walpurgis]

Auto trade type used for attaching badges etc. to cars. It's the best!

Some is foam about 1mm thick, some is just thin.

[Wakefield Turntables]

Thanks lads. I'm experimenting with with tonearm boards on my Lenco 75. I'm making CLD variants. I want the tape to bond the boards to the 75's top plate. I just bought some Gorilla tape.

[occasionalthinker]

This stuff is pretty good too, about 1-2mm thick. Whichever you use, you will need to clean and degrease the surfaces thoroughly. I used some Coleman fuel (heptane, no oil in it) when I stuck the number plate back on my car. IPA wasn't enough to remove wax residue.
https://www.sealantsandtoolsdirect.co.uk/tapes_and_trims/mammoth_tapes/everbuild_mammoth_power_grip_double_sided_tape_25m m_x_25m_P24009.html?gclid=Cj0KCQjwof3cBRD9ARIsAP8x 70NRaniOBqus3IbXHp4aaFZwvDOmfPF2CdakWYceUq9PEDUwae KExFYaAh7wEALw_wcB