PDA

View Full Version : Vintage ECC83/12AX7 and 5751 valves


da2222
13-09-2018, 15:19
Hi Guys

Some top notch signal valves for sale. All are fully tested using calibrated AVO 160ct and test as new or- in most cases- higher unless stated (exact values available upon request). These are mainly rare vintage and certainly not cheap but are priced to sell, significantly lower than can be found on the usual online sites...

Sylvania 5751 3 mica MATCHED pair £85 delivered SOLD

Telefunken ECC83 <> ribbed plates, MATCHED PAIR £125 SOLD (more available on request)

Tungsram ECC83 Foil Getters, welded plates, M7 date codes, MATCHED PAIR hen's teeth rare and perhaps the best ECC83 ever made £225

Philips ECC83 'dimpled getters' MATCHED pair £70

Mazda 12AX7 ECC83 chrome/silver plate MATCHED pair £125 delivered

Tung Sol 12AX7 1950's 'D' getter long plate £80

Brimar CV4004 12AX7/ECC83 £125 MATCHED pair delivered

Tung Sol 5751 long plate 'D" getters £80 pair delivered

Siemens ECC83 long plate £95

http://i65.tinypic.com/lwn7r.jpg

http://i63.tinypic.com/15nrfnr.jpg
Wakefield Turntables
13-09-2018, 19:05
Lots of ECC83 porn :eek: I started tube rolling the for my EAR 834 clone, shame your advertising pairs as I'd need three :(.
da2222
13-09-2018, 20:22
Lots of ECC83 porn :eek: I started tube rolling the for my EAR 834 clone, shame your advertising pairs as I'd need three :(.

3 may well be doable for most...Let me know which ones you're interested in :-)
da2222
13-09-2018, 20:23
TFKS SOLD
ovlov854
14-09-2018, 10:28
can I have the Sylvania 5751 please
PM me your PP address
Domg
14-09-2018, 10:31
Let me know if you have more TFKs
da2222
14-09-2018, 11:27
no problem Martin, thanks
da2222
14-09-2018, 11:33
Sylvania 5751 SOLD, thanks
da2222
15-09-2018, 09:08
bump....some great tubes still left
kininigin
16-09-2018, 11:07
Hi Drew, i'll take the Brimar's off you :)
da2222
16-09-2018, 11:25
Sure thing Darren, can you pm me your address etc?
kininigin
16-09-2018, 17:09
Sure thing Darren, can you pm me your address etc?

Pm replied to.
da2222
16-09-2018, 18:53
PM sent Slav


Hi Drew
Can you PM me test results for Philips and Siemens please
da2222
16-09-2018, 18:53
Brimars now sold, thanks!
da2222
17-09-2018, 10:06
Tubes remaining:

Tungsram ECC83 Foil Getters, welded plates, M7 date codes, MATCHED PAIR hen's teeth rare and perhaps the best ECC83 ever made £225

Philips ECC83 'dimpled getters' MATCHED pair £70

Tung Sol 5751 long plate 'D" getters £80 pair delivered

Siemens ECC83 long plate £95

Mazda 12AX7 ECC83 chrome/silver plate MATCHED pair £125 delivered

Tung Sol 12AX7 1950's 'D' getter long plate £80
da2222
18-09-2018, 07:58
Phillips now sold, thanks
da2222
19-09-2018, 19:58
Final tubes remaining!!

Tungsram ECC83 Foil Getters, welded plates, M7 date codes, MATCHED PAIR hen's teeth rare and perhaps the best ECC83 ever made £225

Tung Sol 5751 long plate 'D" getters £80 pair delivered

Siemens ECC83 long plate £95

Mazda 12AX7 ECC83 chrome/silver plate MATCHED pair £125 delivered

Tung Sol 12AX7 1950's 'D' getter long plate £80
Kneesup
20-09-2018, 19:03
The Tungsram Foil-getters are stunning valves. Strongly recommended. I bought Drew's other pair off him about 4 years ago and still love them.
da2222
20-09-2018, 19:40
They certainly are Richard! Desert island ecc83s- if only electricity existed :-) :-)
ovlov854
21-09-2018, 17:38
Sylvanias arrived today. Many Thanks
da2222
21-09-2018, 19:48
Thanks for letting me know Martin! Enjoy the tubes...
da2222
22-09-2018, 10:59
Great! You’re very welcome...
kininigin
24-09-2018, 19:02
Picked up the valves today. Sounding sweet, thanks.
da2222
24-09-2018, 20:27
Picked up the valves today. Sounding sweet, thanks.

Glad to hear it Darren!
da2222
27-09-2018, 12:33
These top tubes are still available...


Tungsram ECC83 Foil Getters, welded plates, M7 date codes, MATCHED PAIR hen's teeth rare and perhaps the best ECC83 ever made £225

Tung Sol 5751 long plate 'D" getters £80 pair delivered

Siemens ECC83 long plate £95

Mazda 12AX7 ECC83 chrome/silver plate MATCHED pair £125 delivered

Tung Sol 12AX7 1950's 'D' getter long plate £80
da2222
07-10-2018, 13:51
Tungsram Fol getters SOLD

Remaining tubes:

Mazda 12AX7 ECC83 chrome/silver plate MATCHED pair £125 delivered

Tung Sol 12AX7 1950's 'D' getter long plate £80

Tung Sol 5751 long plate 'D" getters £80 pair delivered

Siemens ECC83 long plate £95
ovlov854
09-10-2018, 10:04
Sylvanias arrived today. Many Thanks

Now installed and accompanied by a Sylvania 12AU7 gold pin of a similar vintage in the line stage.
Very Very pleasing :yay::yay:
da2222
09-10-2018, 18:30
Great tubes indeed...glad they're floating your boat!
Now installed and accompanied by a Sylvania 12AU7 gold pin of a similar vintage in the line stage.
Very Very pleasing :yay::yay:
da2222
27-10-2018, 15:02
bump for the remaining tubes:

Mazda 12AX7 ECC83 chrome/silver plate MATCHED pair £125 delivered

Tung Sol 12AX7 1950's 'D' getter long plate £80

Tung Sol 5751 long plate 'D" getters £80 pair delivered

Siemens ECC83 long plate £95
Intenso
03-11-2018, 18:38
Drew can you clear your inbox please

Tony
da2222
03-11-2018, 20:05
Cleared now!
da2222
11-11-2018, 14:08
Tubes still remaining...PLUS Another top pair of 1950s yellow label, black plate, 3 mica Sylvania 5757s testing better than new £125. Many other 12au7/12ax7 types available too
da2222
19-11-2018, 17:39
ROLL UP!!! BLACK FRIDAY WEEK SPECIAL REDUCTIONS;-);-) - ENDS Sunday 25/11

Mazda 12AX7 ECC83 chrome/silver plate MATCHED pair £125 delivered NOW £99

Tung Sol 12AX7 1950's 'D' getter long plate £80 NOW £60

Tung Sol 5751 long plate 'D" getters £80 pair delivered NOW £65
Siemens ECC83 long plate £95 NOW £79

Other ECC82/83 types available- just ask...
da2222
23-11-2018, 07:36
20% + off! Ends Sunday night
da2222
23-11-2018, 17:56
Sylvania 5751 now SOLD....
da2222
25-11-2018, 09:41
Tungsram ECC83 Foil Getters, welded plates (extra pair!!) £225 NOW £199

Siemens ECC83 long plate pair £95 NOW £79

RCA 12AX7 (long plate) pair £85

GE 5751 3 mica £69

Mullard ECC82 (4 pairs available) £45

Other ECC82/83 types available- on request ...
redmcq
27-11-2018, 20:10
Hello
Interested in Telefunken ECC83 <> ribbed plates, MATCHED PAIR £125 SOLD (more available on request)
Would take a matched pair of these. They are diamond marked yes?
da2222
27-11-2018, 20:40
pm sent Colin...
da2222
27-11-2018, 20:41
Tungsram ECC83 Foil Getters, welded plates (extra pair!!) £225

Siemens ECC83 long plate pair £95 RCA 12AX7 (long plate) pair £85

GE 5751 3 mica £69

Mullard ECC82 (4 pairs available) £45
da2222
27-11-2018, 21:17
Tungsram now SOLD PP
da2222
01-12-2018, 15:55
Still available:

Siemens ECC83 long plate pair £95 RCA 12AX7 (long plate) pair £85

Mazda 12AX7 ECC83 chrome/silver plate MATCHED pair £125 delivered

Tung Sol 12AX7 1950's 'D' getter long plate £80

Tung Sol 5751 long plate 'D" getters £80 pair delivered

GE 5751 3 mica £69

Mullard ECC82 (4 pairs available) £45

Siemens & Halske E82CC (3 mica) £95


Other vintage ECC82/83/81 types available on request
da2222
08-12-2018, 16:56
1 x new testing, matched pair smooth-plate Telefunken <> ecc83 AVAILABLE £139 delivered!
da2222
22-01-2019, 18:13
Pairs still available:

Telefunken ECC83 smooth plate £139

Siemens ECC83 long plate pair £95 RCA 12AX7 (long plate) pair £85

Mazda 12AX7 ECC83 chrome/silver plate MATCHED pair £125 delivered

Tung Sol 12AX7 1950's 'D' getter long plate £80

Tung Sol 5751 long plate 'D" getters £80 pair delivered

GE 5751 3 mica £69

Mullard ECC82 (4 pairs available) £45

Telefunken ECC82 smooth plate (2 pairs available)£99


Other vintage ECC82/83/81 types available on request
da2222
26-01-2019, 15:52
bump :-)
da2222
27-01-2019, 21:44
1 pair Telefunken ECC82 smooth plate SOLD, ​another pair remaining
da2222
08-06-2019, 15:08
bump!