PDA

View Full Version : Fs: Naim nait 2 £300



andyrlb
02-06-2018, 08:16
FAULTY!!!
There is a hum/buzz at the speakers even with no source connected.
I replaced a few caps hoping that it would fix the issue but it hasn’t and I thought the caps wouldn’t be at there best anyway .
The amp itself is in lovely condition.
You’re more than welcome to come and see it ( test it ) for yourself but my motto is “ snooze you lose “
https://uploads.tapatalk-cdn.com/20180602/5644b7ab3d42f0e12d8a5fa92e0bc24d.heichttps://uploads.tapatalk-cdn.com/20180602/394568566baadbf31381c1271cb8d081.heichttps://uploads.tapatalk-cdn.com/20180602/f0e29cf962dcd984ce8fe9c3d13417ba.heichttps://uploads.tapatalk-cdn.com/20180602/30d06b4d9f0779c9301df200d42f697a.heichttps://uploads.tapatalk-cdn.com/20180602/a2e36cd0fd387a36456384b61ee3b5d9.heichttps://uploads.tapatalk-cdn.com/20180602/a7297ecb81b679be900970282df69cac.heic



Sent from my iPhone using Tapatalk

struth
02-06-2018, 08:29
its usually the big reservoir caps that cause that on these. think they are replaced with 10k microfarad ones. not much else should cause it

andyrlb
02-06-2018, 08:32
its usually the big reservoir caps that cause that on these. think they are replaced with 10k microfarad ones. not much else should cause it

That simple?? F%*%# sake
Ok I have to [emoji189]
Thanks Grant

Sent from my iPhone using Tapatalk

struth
02-06-2018, 08:35
think they are 4700 in there but if you can fit bigger ones, all the better. height is the main issue. tricky bit is getting the panel out

andyrlb
02-06-2018, 08:39
think they are 4700 in there but if you can fit bigger ones, all the better. height is the main issue. tricky bit is getting the panel out

It is tricky I agree https://uploads.tapatalk-cdn.com/20180602/739decb074efb11b4c704a12d7cfe2ef.heic


Sent from my iPhone using Tapatalk

andyrlb
02-06-2018, 08:45
It is tricky I agree https://uploads.tapatalk-cdn.com/20180602/739decb074efb11b4c704a12d7cfe2ef.heic


Sent from my iPhone using Tapatalk

Will these be suitable Grant ?https://uploads.tapatalk-cdn.com/20180602/7c5631c05ed7b1a83156364b67cbc664.png


Sent from my iPhone using Tapatalk

struth
02-06-2018, 08:49
yup... more the merrier. thats a decent amount. these amps usually hum for a few secs as they charge the caps but should be quiet then. maybe 5 secs. not sure about the voltage. had a feeling 35v was best, but cant remember

DiveDeepDog
02-06-2018, 10:19
25v on a Naim Power amp caps is very low, I would proceed with caution. The only image I can find with google have 40v rated caps

andyrlb
02-06-2018, 10:22
Hi Mark , The 25v ones are the original https://uploads.tapatalk-cdn.com/20180602/3c3075e2f18c345ada6a08d28780954e.heic


Sent from my iPhone using Tapatalk

DiveDeepDog
02-06-2018, 10:32
I’ll stand corrected, only got a Nait 1 and experience with other Naim amps and caps my 1st thought 25v was a little low.

andyrlb
02-06-2018, 10:36
I’ll stand corrected, only got a Nait 1 and experience with other Naim amps and caps my 1st thought 25v was a little low.

Well I have no doubt that you’ll know more than me , everyone says to upgrade anyway [emoji1303]


Sent from my iPhone using Tapatalk

andyrlb
02-06-2018, 10:43
Well the first one seems fine [emoji30]https://uploads.tapatalk-cdn.com/20180602/d6e75dd1ca84969d7cab60ca632fabe5.heic


Sent from my iPhone using Tapatalk

DiveDeepDog
02-06-2018, 11:01
I’ll eat my words, mates Class A serviced Nait2 has the same Rubicon 25v, I’ll go back to my cave ...

andyrlb
02-06-2018, 11:01
I’ll eat my words, mates Class A serviced Nait2 has the same Rubicon 25v, I’ll go back to my cave ...

[emoji23][emoji23]


Sent from my iPhone using Tapatalk

andyrlb
03-06-2018, 17:52
[emoji23][emoji23]


Sent from my iPhone using Tapatalk

Bump


Sent from my iPhone using Tapatalk

andyrlb
04-06-2018, 06:03
SOLD


Sent from my iPhone using Tapatalk