PDA

View Full Version : SMSL SA-S3 Question


southall-1998
02-02-2018, 17:53
This was given to me from a friend of mines.

Forgive me for the dumb question. What will be the correct power supply for this amp? Second pic showing the rear.

Thanks.

S.

22628 22629
Firebottle
02-02-2018, 18:20
Presumably a psu that gives 14V for maximum output.

A cheap 13.8V linear would be good.

It should work OK on 12V i would have though with a slightly reduced output.
Covenant
02-02-2018, 19:35
I have one of these, not bad at all.I use it with a 13.8 regulated supply that I got off fleabay for a tenner. Much better than the supplied switched mode supply
southall-1998
02-02-2018, 19:39
I have one of these, not bad at all.I use it with a 13.8 regulated supply that I got off fleabay for a tenner. Much better than the supplied switched mode supply

Link?

S.
Covenant
02-02-2018, 20:00
Link?

S.It was about 4 years ago! An old supply for an amatuer radio. You should be able to find something similar.

Sent from my SM-G920F using Tapatalk