Magna Audio
22-11-2017, 12:02
Next up a range of projects for a customer in London.
This armbase had seen some wear with the arm pillar retaining screw thread stripped.
The original solution was not ideal.
I made a new slightly bigger thread for a grub screw, a second one to beef it up and a third grub screw to properly retain the outer collar.
Should be good for years to come now.
https://uploads.tapatalk-cdn.com/20171122/c519a43633222a6b33b78f762b212ac1.jpg
https://uploads.tapatalk-cdn.com/20171122/9f374f25025ee5bb9fa9a3a4c99d6840.jpg
Next a Counterweight sleeve to fit over the original and increase the mass by 118g
https://uploads.tapatalk-cdn.com/20171122/03d7794d4b265763410a8d1709c8c397.jpg
https://uploads.tapatalk-cdn.com/20171122/507d46e66fe1f94024bcdd28c3529e67.jpg
Lastly, a rework of the recent armboard I made.
The tail turned out to be too long. I shortened it to fit. No charge.
The customer had tried to enlarge the SME slot to take a different armbase.
I refurbed it to improve the looks and function with a slight slot for adjustment
Restored
https://uploads.tapatalk-cdn.com/20171122/0f777cb6d3817670551ef44822e8f18e.jpg
With larger slot. The SME armbase will still fit of course and cover the hole nicely.
https://uploads.tapatalk-cdn.com/20171122/2ea50497d5861840fe0d3283f035acf8.jpg
This armbase had seen some wear with the arm pillar retaining screw thread stripped.
The original solution was not ideal.
I made a new slightly bigger thread for a grub screw, a second one to beef it up and a third grub screw to properly retain the outer collar.
Should be good for years to come now.
https://uploads.tapatalk-cdn.com/20171122/c519a43633222a6b33b78f762b212ac1.jpg
https://uploads.tapatalk-cdn.com/20171122/9f374f25025ee5bb9fa9a3a4c99d6840.jpg
Next a Counterweight sleeve to fit over the original and increase the mass by 118g
https://uploads.tapatalk-cdn.com/20171122/03d7794d4b265763410a8d1709c8c397.jpg
https://uploads.tapatalk-cdn.com/20171122/507d46e66fe1f94024bcdd28c3529e67.jpg
Lastly, a rework of the recent armboard I made.
The tail turned out to be too long. I shortened it to fit. No charge.
The customer had tried to enlarge the SME slot to take a different armbase.
I refurbed it to improve the looks and function with a slight slot for adjustment
Restored
https://uploads.tapatalk-cdn.com/20171122/0f777cb6d3817670551ef44822e8f18e.jpg
With larger slot. The SME armbase will still fit of course and cover the hole nicely.
https://uploads.tapatalk-cdn.com/20171122/2ea50497d5861840fe0d3283f035acf8.jpg