View Full Version : Cans For Work, Workshop, Recommendations
So keep long story short, after 7 years of working on my own, I have decided to wind down my business.
Recently started a new cushy job, all is pretty much well, but like anything in life I find myself dealing with all sorts of issues which I never had.
I'm looking in to getting new cans for working environment, any kind of input would be greatly appreciated from fellow members who may be in a similar situation.
I have P7 B&W's at home and they are smooth and lovely and I like them a lot, but not for longer sessions as they sometimes feel a little bit uncomfortable. So comfort would be a big plus
Noice canceling, I'm not sure, I would like to drown out colleagues chatting but not the noisy workplace so to speak, drilling, hammering got used to that long time ago, does not bother me at tall.
Wired headphones only , using old iphone at the moment with earphones.
Cash, thats a difficult one, something inbetween 100-200, I will not shy away for anything less expensive,could go for s/hand and get replacement earpads I suppose, or is that not recommended?
Anything else?
Many thanks in advance, Paul
These are superb. Comfy secure and good sounding closed back cans. You might get a set on ebay a bit cheaper. I can wear them as long as i want without fatigue. Run off an iphone ok too
https://www.amazon.co.uk/dp/B00PEU9CFA/ref=twister_B01D8ZEUEU?_encoding=UTF8&psc=1
These are superb. Comfy secure and good sounding closed back cans. You might get a set on ebay a bit cheaper. I can wear them as long as i want without fatigue. Run off an iphone ok too
https://www.amazon.co.uk/dp/B00PEU9CFA/ref=twister_B01D8ZEUEU?_encoding=UTF8&psc=1
Grant, I was looking at them the other day, Audio Technica's in general seem to appeal to me, heard a few of them at audio show last year. Would they take a beating? taking on an off all the time, dust all over the place, are they flimsy?
Ooh they do them in sexy gun metal grey
Yes its the gunmetal ive got. Will pop a pic on i took. They are fairly well made and fold flat.. might scratch a bit mind i dint know as they are a metal style finish rather than plastic
https://uploads.tapatalk-cdn.com/20170427/4ffbbecbfee6b827bd6bea53d334663e.jpeg
[QUOTE=struth;858857]Yes its the gunmetal ive got. Will pop a pic on i took. They are fairly well made and fold flat.. might scratch a bit mind i dint know as they are a metal style finish rather than plastic
Please do, thanks, by the sound of it so far added to the top of the list, will wait till the weekend if anything else comes up.
For the money, these are supposed to be good. https://www.thomann.de/gb/superlux_hd_681_evo_bk.htm?ref=search_rslt_Superlu x_297902_0
I would say they are ideal in your working environment, as they are almost disposable at that price.
I've recently bought a pair of AKG K550 (https://www.whathifi.com/akg/k550/review) for use at work (office work). I'm very pleased with them. They are very comfortable, cut out a lot of the background noise, and sound very good. I got them from Richersounds for £105 - which I think is a steal. The price there has gone up again to £150, but if you hunt around there are other places selling them for near £100.
https://images-na.ssl-images-amazon.com/images/I/91-TfdcfEhL._SL1500_.jpg
Thanks Rob,Kevin, i should probably mention im after a strong construction, had pair of pioneer cans that i loved years ago the swiwel plastic part that had a bearing cracked and no araldite or screws ever fixed them, so i will try to avoid anything plasticky. Sound quality is also priority. Akgs look decent on paper might give them a listen this weekend richer sounds is round the corner from where I live.
Given what you're looking for , there will be absolutely nothing to beat the Beyerdynamic dt150.
Flat response and built for 24/7 wear in the studio. Replaceable parts are easily obtainable too. My headphones of choice for hifi so don't think they're only well made.
http://www.studiocare.com/beyerdynamic-dt150-250-ohm-headphones.html
Sent from my SM-G920F using Tapatalk
good cans those(on my list), but maybe a bit high ohms for a phone. had my eye on the beyer 770 i think is the model as they do them in various ohmages.
good cans those(on my list), but maybe a bit high ohms for a phone. had my eye on the beyer 770 i think is the model as they do them in various ohmages.
That is true if that is the only way you listen. I know there is a lower ohm version of the DT250 which has similar attributes. IMO it's the studio phones in the Beyer range where the value lies: they're engineered for flat response and comfort. It's what I want in a headphone personally. I am not interested in bespoke finishes nor enhanced bass so that they sound good with lesser sources.
This gives me something to think about, got tired of reading reviews, some personal insights are greatly appreciated, many thanks.
I have limited knowledge about the ohm impendences, quick search showed quote: ''The main practical difference is that higher ohms produce better sound quality, but need more power. E.g. 32 ohms is ideal for use with mobile devices, but 80+ is good for use with desktop computers/studio equipment.'' would that be accurate without going into it too deep?''
I think it may be worth speaking to studiocare about trying the phones.
I do use my dt150 with my phone and they're fine. They don't go silly loud but they're loud enough. Fed by a high quality headphone input in my denon pma850, they absolutely sing.
Sent from my SM-G920F using Tapatalk
My son has the dt250 80 ohm and uses them with his phone.
Sent from my SM-G920F using Tapatalk
I think it may be worth speaking to studiocare about trying the phones.
I do use my dt150 with my phone and they're fine. They don't go silly loud but they're loud enough. Fed by a high quality headphone input in my denon pma850, they absolutely sing.
Sent from my SM-G920F using Tapatalk
I think I will do some investigation between 150 and 250 and maybe the audio technica, not sure if there is anything else, the beyers look robust, no dealers around so buying deaf wouldnt be an ideal choice, but worked before, might do it again.
I use Howard Leight headsets 32npr . Standard issue for Airport apron work area use :lol:.
V good noise rejection and fairly comfortable.
Ive just bought a set of oppos blind. Hoping ive not cocked up:eyebrows:
I've got a pair of Shure SRH840 headphones. They are designed for sound engineers, so they have great cushions, the over the ear pads are plenty large for my big ears, and the top cushion is also nice and thick. They sound great! Nice flat response with strong, deep bass and top end up in the 20's. I've worn them for many hours during recording sessions and they are just nice! Well made, tough, and great sound, at a very reasonable price, I paid $200.
Sent from my iPad using Tapatalk
Looked at the shures. only thing was they are huge. They get excellent reviews.
I think I will do some investigation between 150 and 250 and maybe the audio technica, not sure if there is anything else, the beyers look robust, no dealers around so buying deaf wouldnt be an ideal choice, but worked before, might do it again.
there are a set of AT cans in black like mine going on ebay from Audio technica... refurbed(mine were too) at an excellent price. might save you some cash
http://www.ebay.co.uk/itm/Audio-Technica-ATH-MSR7-Headband-Headphones-Black-/292110424754?hash=item4403235ab2:g:6GgAAOSwll1Wtzc-
Many thanks for all your suggestions, I have set my eyes on the dt770 32ohm, ticked all the boxes on paper ,but as usual, im overthinking too much, or waiting till my last set of earbuds disintegrates. Shame I cant try them, nearest dealer is miles away.
I guess I should have asked what kind of work do you do? Could make a huge difference in your choice.
Sent from my iPad using Tapatalk
I guess I should have asked what kind of work do you do? Could make a huge difference in your choice.
Sent from my iPad using Tapatalk
Jeweller, manufacture and restoration, Russel. I'm not after complete noise isolation, Just something to drown out the noise from people around me, so any kind of closed back design would do I suppose.
My new Oppos are by far the most comfortable Ive ever worn. light too, but over budget I think.but will work off a phone
I need to sort this out quick before I buy something else.
Yesterday browsing through the internet found stax 2050, badly wanted a pair years ago. They would be useless in work environment, but would replace my p7s, hmm.
I reckon just to be on the safe side I may try some dealers in town and hear few options.
Grant, I think thats a bit too much for what I need it for.
P.S Anyone heard the dt770 32 or 80 ohms?
Perhaps some in ear monitors may be appropriate in such a workplace? The fit would not distract you. A big set of heavy phones on your head may cause you to be fiddling with them, adjusting their fit often. The in ear units will stay put, in place, and are very light weight. And not so obvious to others in the work space. Unobtrusive. Personally I'm not keen on having something stuck in my ear, but I guess I'd get used to it over time. And an expensive set of in ear monitors have superb audio, some have multiple drivers. I personally have little experience with them, but have known musicians that wear them on stage, they are doing cartwheels and jumping up and down, and never think about them, they love them over standard stage monitors.
Sent from my iPad using Tapatalk
So I ended up getting a sofa, I knew this was gonna happen.
So I ended up getting a sofa, I knew this was gonna happen.
Bit heavy for all day wearing lol
Arkless Electronics
02-06-2017, 17:09
So I ended up getting a sofa, I knew this was gonna happen.
A laid back presentation then?
U2 are on a roll :eyebrows:
wee tee cee
08-06-2017, 17:23
Any of the Superlux range from THOMANN would suit you and your i pod. 668b/330/440/660 cant remember which one is the closed design. his site does akg240 replacement felt pads which really aid comfort.
Senn hd202S work really well with an i pod-closed design tough and cheap and sound really good for the price. I find senn really nail cable isolation and comfort. I own all of the above and 650s/700s so put my money where my ears are....
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.