mido
11-04-2017, 14:34
Hi everyone,
I'm Selling off some surplus items due to a change in living circumstances. Sadly, I will no longer be able to run a 2nd system or store much secondary gear.
First up, a modified Lenco TT. Started life as a GL69, but was converted to take a heavy platter and placed in a very heavy slate plinth. The platter sits above the plinth rather than within a pan. The top plate has been rotated so that any arm can effectively be fitted independently of this. All unnecessary holes have been filled and a nice copper sheet placed over these.
There are two acrylic armboards, one has been cut for a Jelco arm (please see pics on photobucket of when I had my SA750 fitted).
http://s1300.photobucket.com/user/Lenco75/library/Lenco
The other board is for a Rega style tonearm, I used a Roksan arm for a while with good results too. Further acrylic boards can easily be attained from sellers who will cut to size.
Motor runs smoothly and quietly. There is a wooden outer plinth which the slate plinth can sit within. It is held in place at the corners. Alternatively, the deck can be placed on some cones or other alternative.
I am asking for £275 for this TT. No arm included. Collection from north London or meet up.
http://i1300.photobucket.com/albums/ag85/Lenco75/WP_001982_zpspyg7lyq3.jpg (http://s1300.photobucket.com/user/Lenco75/media/WP_001982_zpspyg7lyq3.jpg.html)
I'm Selling off some surplus items due to a change in living circumstances. Sadly, I will no longer be able to run a 2nd system or store much secondary gear.
First up, a modified Lenco TT. Started life as a GL69, but was converted to take a heavy platter and placed in a very heavy slate plinth. The platter sits above the plinth rather than within a pan. The top plate has been rotated so that any arm can effectively be fitted independently of this. All unnecessary holes have been filled and a nice copper sheet placed over these.
There are two acrylic armboards, one has been cut for a Jelco arm (please see pics on photobucket of when I had my SA750 fitted).
http://s1300.photobucket.com/user/Lenco75/library/Lenco
The other board is for a Rega style tonearm, I used a Roksan arm for a while with good results too. Further acrylic boards can easily be attained from sellers who will cut to size.
Motor runs smoothly and quietly. There is a wooden outer plinth which the slate plinth can sit within. It is held in place at the corners. Alternatively, the deck can be placed on some cones or other alternative.
I am asking for £275 for this TT. No arm included. Collection from north London or meet up.
http://i1300.photobucket.com/albums/ag85/Lenco75/WP_001982_zpspyg7lyq3.jpg (http://s1300.photobucket.com/user/Lenco75/media/WP_001982_zpspyg7lyq3.jpg.html)