JVC TT-71 replinth

[ianlenco]

Although I mentioned this deck in my welcome thread I realise I've never posted about it's completion.
It started like this:

http://i.imgur.com/SqqQKgbh.jpg#gWPQG

and went through a few experiments with different materials, including no plinth:

http://i.imgur.com/pBT4mVhh.jpg#gWPQG

Chopping board plinth:

http://i.imgur.com/K3zUzlSh.jpg#gWPQG

Slate plinth:

http://i.imgur.com/jHeZrsgh.jpg#gWPQG

Of all these I marginally preferred the chopping board prototype. So I went ahead with a ply build using MU25, a compressed and denser version of beech ply. This is what I ended up with.

http://i.imgur.com/wf8X4ABh.jpg#gWPQG

Then decorated :)

http://i.imgur.com/nGpavkUh.jpg#gWPQG

It's a lovely deck to use and fortunately sounds good too.

[struth]

Looks good. Like the use of ali styled strips.. long arm too.

Slate takes getting used too, but ultimately rewarding tho

[ianlenco]

Thanks, I've used plenty of slate before with Lencos where it works well but found it a bit too much with the JVC.

Here's one with a cut down PTP and a crazy arm - the RSA-1, wish I'd never sold that!

http://i40.tinypic.com/2hevrs3.jpg

[Dubster68]

Love the ideas Ian well done with the experimentation. What are the spikes in the 4th pic ?

[ianlenco]

Thanks Mick. The feet are from Vic at Transfi Audio. Very sturdy and well made. http://www.trans-fi.com/shop
Scroll down to find them.

[Dubster68]

Thanks for the link Ian.

[Spider]

How did you apply the decor to the ply plinth?
How does it all fasten into the plinth, I'm working on my first plinth for a Garrard 401, very interested in how other people have solved problems and worked out how to mount arms etc.
My first plinth is a prototype stacked ply type that is a work in progress, I think it will end up as scrap but I'm learning as I go.

[ianlenco]

Hi Tim,
It's a style I've used before - somewhere between Bauhaus and American diner :) Basically I inserted thinner ply between the Mu25 layers.

http://i.imgur.com/zbeJND1h.jpg#gWPQG

The radiuses were cut using a jigsaw then any voids filled and the whole thing rollered with a Farrow and Ball eggshell. This time I left a little of the roller texture on the finish as it gives it a look sort of like leather - to my mind anyway. I've used the same technique but with lots of wet and dry paper between coats to get a flat finish. Here's one I did earlier using a rather knackered Goldring G99 as base. The shiny trim in both cases is simply self adhesive car chrome trim.

http://i8.tinypic.com/5y9vj2o.jpg

I'm no great woodworker so basically it's lots of elbow grease and patience as you build up the paint layers

[paulf-2007]

That is very nice indeed Ian

[Spider]

Excellent work thanks for the info.
I hope mine turns out as nice as yours.
I'm thinking of painting myself rather than varnish.
Very cool plinth Ian

[ianlenco]

Thanks Tim, good luck with yours. Farrow and Ball eggshell is nice to use as it seems to have plenty of pigment. You can always wax it afterwards if you want a higher gloss.

[Dubster68]

Thanks Mick. The feet are from Vic at Transfi Audio. Very sturdy and well made. http://www.trans-fi.com/shop
Scroll down to find them.

Ian Vic just made me some spikes with a threads for my turntable. Cant wait to fit them they look well made and solid. Thanks for the heads up. He also seems like a nice bloke.

[Spider]

Hi Tim,
It's a style I've used before - somewhere between Bauhaus and American diner :) Basically I inserted thinner ply between the Mu25 layers.

http://i.imgur.com/zbeJND1h.jpg#gWPQG

The radiuses were cut using a jigsaw then any voids filled and the whole thing rollered with a Farrow and Ball eggshell. This time I left a little of the roller texture on the finish as it gives it a look sort of like leather - to my mind anyway. I've used the same technique but with lots of wet and dry paper between coats to get a flat finish. Here's one I did earlier using a rather knackered Goldring G99 as base. The shiny trim in both cases is simply self adhesive car chrome trim.

http://i8.tinypic.com/5y9vj2o.jpg

I'm no great woodworker so basically it's lots of elbow grease and patience as you build up the paint layers

Really like this plinth, excellent work, you've got me thinking about a painted finish for mine now.