PDA

View Full Version : Wadia 121 problem



eksiil
26-12-2016, 18:13
I'd appreciate any thoughts from anyone familiar with the Wadia 121 DAC or Wadia repairs in general. my Wadia 121 worked fine for 3+ years, its action always accompanied by a prodigious amount of relay clicks. suddenly there's almost no audible output -- and the clicking is gone. I tried rapping my knuckles on the casing. this brought the sound (& the clicking) back for an hour or two, but didn't prove to be (as I had suspected) a lasting solution.

the problem is shared by the USB and RCA inputs (haven't tried the rest). the display works & the unit accepts remote commands. I've unplugged it for extended periods twice with no joy.

I'm forced to assume the unit is not going to fix itself. it's well out of warranty & googling "Wadia repairs" suggests there's no third-party servicing & it looks like it would need to be shipped to the US. I'd be grateful for any informed advice.

much obliged

ahto

337alant
26-12-2016, 18:21
Well it sound like a loose connection maybee a cold soldered or cracked joint on the PCB
worth taking the top off if your confident ?

Alan

eksiil
28-12-2016, 20:40
thanks. had a look inside. to say I don't have the first idea would be an understatement. the PCB & the rest of it look very robust -- & extremely miniature.

krupkin
29-07-2017, 22:29
HI! How did You solve the Wadia problem, today i occured the same!

eksiil
31-07-2017, 14:24
i contacted the UK reps, who told me the check-up fee was £90. I've moved on to a Raspberry Pi based solution.

krupkin
31-07-2017, 18:59
Thanx 4 an answer! So You didn't repaired it?

eksiil
01-08-2017, 18:29
nope, haven't got round to it.

krupkin
17-08-2017, 18:30
hi eksill!
i just solve the wadia problem - the cause was cold solder on power supply leg of relay which turns on the rca and xlr output. it costs me 40 euro in polish wadia distributor - horn distribution. best regards!

eksiil
22-08-2017, 19:58
many thanks, I'll ask my local man with the soldering iron what he thinks. watch this space.

eksiil
11-06-2018, 18:06
I can now report it was an issue with a computer board. successfully dealt with by Wadia-authorised technicians in the UK.

Macca
11-06-2018, 20:09
That took a while... but it's good you got it sorted in the end. Always wanted a go with some Wadia myself, but it holds its value very well on the used market and I'm a cheapskate. Anyways, Enjoy:)