View Full Version : ReVox A77 Front panel
How hard/easy is it to remove the ReVox A77 front so as to get to the power bulb ?
topoxforddoc
03-12-2016, 23:08
you can download the service manual here
http://www.hifiengine.com/manual_library/revox/a77.shtml
Audio Al
04-12-2016, 00:25
Sorry can't help with this one , not taken my A77 apart
Sorry can't help with this one , not taken my A77 apart
Thanks for that, I have the service manual already, I should try reading it, and yes it all looks quite simple.
337alant
04-12-2016, 16:28
yeah look in the manual sec 3.3 page 6
Pull off all the pot knobs and power switch and remove the 2 screws marked B
whilst you are there take to opportunity to give the pots and switches a spray with deoxit
Alan
yeah look in the manual sec 3.3 page 6
Pull off all the pot knobs and power switch and remove the 2 screws marked B
whilst you are there take to opportunity to give the pots and switches a spray with deoxit
Alan
It was serviced earlier this year before I bought it so I assume all that was done. It since has developed
a loose power bulb,which I am told is quite common because of the design of the bulb holder, maybe
one day when I heat up my soldering iron I can replace it with an LED.
Thanks for the tips and the spray, will get some to have at hand.
EDIT: Well I was going to get some but its a bit pricey, £21 a can :/
337alant
05-12-2016, 02:20
EDIT: Well I was going to get some but its a bit pricey, £21 a can :/
LOL yeah its not cheap, you can use Servisol 10 from Maplins as an alternative.
Alan
Thanks for the cheaper pointer :)
Had the front panel off and fixed the loose power bulb/lamp, well fixed it for now until it rattles loose again, not the best designed bulb/lamp holder in the world.
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.