Open Door
26-11-2016, 23:03
Very low hours use, still running in.
Takes up little room. Very smooth performer.
I just have too many amps about - this was a spare back up (but I have another one for this purpose). Maybe 20 hours use thus far.
Looks as new since it practically is.
Has the stock Tung Sol tubes in place.
£340 incl UK post.
Rated Output Power: 30 W per channel at 8 ohms, 22Hz to 20KHz
55 W per channel at 4 ohms, 22Hz to 20KHz
Frequency Response: (at 1 watt into 8 ohms) 5Hz to 100KHz + 1dB
Bandwidth: 22Hz to 20kHz + 3dB; 0dB 30 W 1KHz
Distortion THD: Less than 0.1% at 30 W output, 25Hz to 18KHz
Input Impedance: 47Kohms
Input Sensitivity: 400mV at 1KHz and 8 ohms for 30 watt output
Noise and Hum: 90dB below rated output
Tube Complement: 2 pcs. 12AX7 for the preamplifier, TungSol new issue
Power Requirements: 110V-120 VAC 60Hz 180 watts-standby, 250 watts maximum (220 VAC 50Hz option)
Dimensions: 7 inches wide by 6 inches deep by 4 inches high
Weight: 8 pounds (3.65 Kg)
Fuse: 0.5 Amp Fast Blo
Construction Details and Features:
o Fully Integrated Stereo Amplifier: Input 400mV driving 30 watts
o Multiple Inputs: Front mounted selector switch - Input, Tuner, DVD, CD, and Aux. (for TV, VCR or Computer|).
o State of the Art Components: ALPS audio potentiometer, gold plated RCA input jacks, and front panel minjack input.
o Remote Control: Volume and mute
o State of the Art Components: ALPS audio potentiometer, gold plated RCA input jacks.
o Low Feedback Design: Only 5 dB 186461864718648
Takes up little room. Very smooth performer.
I just have too many amps about - this was a spare back up (but I have another one for this purpose). Maybe 20 hours use thus far.
Looks as new since it practically is.
Has the stock Tung Sol tubes in place.
£340 incl UK post.
Rated Output Power: 30 W per channel at 8 ohms, 22Hz to 20KHz
55 W per channel at 4 ohms, 22Hz to 20KHz
Frequency Response: (at 1 watt into 8 ohms) 5Hz to 100KHz + 1dB
Bandwidth: 22Hz to 20kHz + 3dB; 0dB 30 W 1KHz
Distortion THD: Less than 0.1% at 30 W output, 25Hz to 18KHz
Input Impedance: 47Kohms
Input Sensitivity: 400mV at 1KHz and 8 ohms for 30 watt output
Noise and Hum: 90dB below rated output
Tube Complement: 2 pcs. 12AX7 for the preamplifier, TungSol new issue
Power Requirements: 110V-120 VAC 60Hz 180 watts-standby, 250 watts maximum (220 VAC 50Hz option)
Dimensions: 7 inches wide by 6 inches deep by 4 inches high
Weight: 8 pounds (3.65 Kg)
Fuse: 0.5 Amp Fast Blo
Construction Details and Features:
o Fully Integrated Stereo Amplifier: Input 400mV driving 30 watts
o Multiple Inputs: Front mounted selector switch - Input, Tuner, DVD, CD, and Aux. (for TV, VCR or Computer|).
o State of the Art Components: ALPS audio potentiometer, gold plated RCA input jacks, and front panel minjack input.
o Remote Control: Volume and mute
o State of the Art Components: ALPS audio potentiometer, gold plated RCA input jacks.
o Low Feedback Design: Only 5 dB 186461864718648