gerlando
10-11-2016, 16:53
Two layers Oak/MDF plinth for Garrard 401 (Rega cut)
The plinth is a bit tatty.
The small arm-board I'm including is cut for Rega arms; this is fine but slightly small for the plinth, so it exposes a couple of drill holes on the edge (see picture 2). I can include a larger arm-board that covers the drill holes, and you could use for any length of arm (see picture 3).
The plinth is free of charge if collected :), otherwise postage is £20 :(.
Collection from Ealing, West London.
The advert is for the plinth and arm-boards only; the deck, the tonearm and the stand are not included!
If you have any questions, please ask.
Many thanks.
Mauro
https://s14.postimg.org/eb8vxtfld/Gar_1.jpg
https://s21.postimg.org/fg3cz2waf/Gar_2.jpg
https://s15.postimg.org/9gyd59n0b/Gar_3.jpg
The plinth is a bit tatty.
The small arm-board I'm including is cut for Rega arms; this is fine but slightly small for the plinth, so it exposes a couple of drill holes on the edge (see picture 2). I can include a larger arm-board that covers the drill holes, and you could use for any length of arm (see picture 3).
The plinth is free of charge if collected :), otherwise postage is £20 :(.
Collection from Ealing, West London.
The advert is for the plinth and arm-boards only; the deck, the tonearm and the stand are not included!
If you have any questions, please ask.
Many thanks.
Mauro
https://s14.postimg.org/eb8vxtfld/Gar_1.jpg
https://s21.postimg.org/fg3cz2waf/Gar_2.jpg
https://s15.postimg.org/9gyd59n0b/Gar_3.jpg