Advice needed Trichord Dino

[Natara]

:scratch::scratch:
I am currently home demoing Trichord Dino Mk 1 & 2 and need help finding the optimum settings for the switches on the bottom of these units, my cartridge is a High Output Dynavector 10x5 I am a bit of a novice with this type of phono stage so any help/advice would be very gratefully received.
Thank you so much.

[struth]

set it as you would for a MM cart.

[Barry]

Your Dynavector 10X5 has a high output of 2.5mV and a coil resistance of 150 Ohm.

I would therefore suggest you set the loading impedance to either 1000 Ohm or 47 kOhm, and the gain to 1-3mV (marked as "MC high"). Don't worry about the capacitance, though you might like to set it to 1000pF to start with.

Hope this helps. Let us know how you get on :)

[Natara]

Thank you for kind help after following your help I have had some excellent results a real improvement over my previous Rega MM stage. Unfortunately it has made me curious how a low output mc will sound!