Lenco GL75 tonearm

[Jimbo]

Anyone got a good condition Lenco GL75 original tonearm they want to sell?

Must be straight with no Brewers droop!

[Firebottle]

I've got some parts in the workshop, I'll have a look at what there is, maybe make a good one out of the combination of good parts :scratch:

[Jimbo]

Cheers Alan.

I don't need counterweights ,anti -skate bits and bobs as I will re use these.

[Brian28]

Got a rebuilt one for sale
Pm me and i will send pics if your intersted

[Firebottle]

I've now had a close look at the parts I have James.

One very knackered arm tube, with bent knife bearings, short cable and twisted end/headshell connector.
I've now stripped this down to headshell connector and counterweight stub tube.

I now realise how well the interference fit parts fit together :D

I also have a good condition arm tube but also with short cables, so it is in need of a re-wire. I shall have a look at my in-use arm and see what overall condition that is in.

Have you seen the post on Lenco Heaven where the counterweight stub is made solid?
Part way down here http://www.lencoheaven.net/forum/index.php?topic=8601.0

Sorry can't help further,

Alan

[Jimbo]

I've now had a close look at the parts I have James.

One very knackered arm tube, with bent knife bearings, short cable and twisted end/headshell connector.
I've now stripped this down to headshell connector and counterweight stub tube.

I now realise how well the interference fit parts fit together :D

I also have a good condition arm tube but also with short cables, so it is in need of a re-wire. I shall have a look at my in-use arm and see what overall condition that is in.

Have you seen the post on Lenco Heaven where the counterweight stub is made solid?
Part way down here http://www.lencoheaven.net/forum/index.php?topic=8601.0

Sorry can't help further,


Alan
Thanks for looking mate. I have had a good look round the net and there are complete arms available anything between £25-£80 depending on condition.

I am after something mint so will probably pay top price and get something in really good condition, it is for cosmetic reasons as well as technical reasons!:)

You will be surprised when you hear it next with the Jico SAS on it. That is why I made the comment to you about MC vs MM cartridges;)

Cheers:cool: for rummaging in your share parts bin again!:)

[Brian28]

If this is anygood , let me know .

Carbon fibre arm , complete rewire with solid core silver wire .

No degradeable bearing blocks , this one has brass plates ..

£60 if your intersted ..

Or perhaps i could rebuild the one you have ..

Cheers Brian

[Jimbo]

If this is anygood , let me know .

Carbon fibre arm , complete rewire with solid core silver wire .

No degradeable bearing blocks , this one has brass plates ..

£60 if your intersted ..

Or perhaps i could rebuild the one you have ..

Cheers Brian

Thanks for the offer Brian, however I am after an original condition Lenco arm.

[struth]

got one lying about somewhere james. if i can find it and its worth having I will give you it if you want

[Jimbo]

got one lying about somewhere james. if i can find it and its worth having I will give you it if you want

Thanks for looking Grant. My tonearm is ok but there are a few issues with it including a slight bend in the end and a cracked bearing cover.

[struth]

i'll be out there again tomorrow so will ave a look... I saw it a few months ago so should still be there. memory says it was a complete arm etc inc headshell weights etc and with new bearings in....but my memory, like my body aint what it once was lol

if you find one elsewhere though just ignore me and go for it

[Jimbo]

i'll be out there again tomorrow so will ave a look... I saw it a few months ago so should still be there. memory says it was a complete arm etc inc headshell weights etc and with new bearings in....but my memory, like my body aint what it once was lol

if you find one elsewhere though just ignore me and go for it

No worries Grant but if you do dig it up can you pop a pic on. :cool:

[struth]

Aye is may well have a similar problem. Where the joint is is not as nice as it could be

http://uploads.tapatalk-cdn.com/20160421/f28cecffde0e9765c190feb7a08a8a4f.jpg


Sent from my iPad using Tapatalk

[struth]

This in post jim


Sent from my iPad using Tapatalk