View Full Version : sleeper aiwa reciever
I picked up a Aiwa ax 7600 receiver recently in good condition apart from heavy fag smoke staining.
a few hours taking apart, cleaning, hoovering, pot squirting and polishing and it looks the biz....sounds good too!!
sadly one of the dial lamps has gone out and as this piece of kit is quite rare, the replacement bulbs are even rarer.
does anyone know of a source in the uk where I can purchase a replacement...its a 8 volt 250milliamp bayonet type.
there is a plastic ring around the base of the glass portion of the bulb but I guess I can do without this bit!!
thanks...NIGE.
Firebottle
10-03-2016, 17:21
Can you post a pic of the lamp Nige?
http://i1272.photobucket.com/albums/y383/sumday1/WIN_20160310_20_47_51_Pro_zpsjtiwor2b.jpg (http://s1272.photobucket.com/user/sumday1/media/WIN_20160310_20_47_51_Pro_zpsjtiwor2b.jpg.html)
well...that worked!!
the whole unit had to be removed as the bulb had seized in tight...the silver doobry fits over the bulb and directs the bulbs light onto the tuners display.
NIGE.
http://i1272.photobucket.com/albums/y383/sumday1/WIN_20160310_20_48_08_Pro_zpsxz46zpso.jpg (http://s1272.photobucket.com/user/sumday1/media/WIN_20160310_20_48_08_Pro_zpsxz46zpso.jpg.html)
bulb out far right, bottom.
NIGE
Firebottle
11-03-2016, 06:02
The reason I asked for a pic was to see what type of lamp it was.
I have looked in my spares box but only have screw in types, sorry Nige.
:(
jandl100
11-03-2016, 07:09
http://i1272.photobucket.com/albums/y383/sumday1/WIN_20160310_20_48_08_Pro_zpsxz46zpso.jpg (http://s1272.photobucket.com/user/sumday1/media/WIN_20160310_20_48_08_Pro_zpsxz46zpso.jpg.html)
bulb out far right, bottom.
NIGE
Oh WOW - YUMMEEE -- I just love this era of Jap goodness. :thumbsup::stalks::eek::goodthread::respect:
I am dead jealous! :lol:
What model is it?
Audio Al
11-03-2016, 07:47
3 here
http://www.ebay.co.uk/itm/Pioneer-Bayonet-Type-Indicator-Lamps-8V-250MA-Tested-Parting-Out-SX-650-550-/131504586430
Or
Use 300ma instead , change all the bulbs
http://www.vintage-electronics.net/bayonet-lamp-8v-300ma.aspx
:)
StanleyB
11-03-2016, 09:46
Aiwa made some lovely looking and sounding amps and receivers in that genre. I have their top of the range 8700 in my rack on active duties.
http://www.homehifi.co.uk/aos/aiwa.jpg
jandl100
11-03-2016, 09:57
:stalks:
:wow:
StanleyB
11-03-2016, 10:02
:stalks:
:wow:
And these sound luvely with those NS1000M's you donated in person to my audio set up :eyebrows:.
jandl100
11-03-2016, 10:25
Good to hear you are still enjoying those Yammies, Stan! :)
walpurgis
11-03-2016, 11:58
Aiwa certainly made some nicely turned out gear in the seventies and into the eighties. I had a couple of the receivers. I'd rate the build quality alongside Luxman and Yamaha.
They did a lovely-looking 'mini compo' system too. Not seen one around for a while now but they used to come up quite cheap on eBay.
walpurgis
11-03-2016, 12:07
They did a lovely-looking 'mini compo' system too. Not seen one around for a while now but they used to come up quite cheap on eBay.
That was quite a neat little setup.
I had the slightly similar Toshiba Aurex mini component system. Pre, Power & tuner.
All from around the same era, 1978 to about 1982 IIRC
THANKS for the replies...I guess I'll swop out all the lamps for even lighting.
to reply to the poster asking for the mod number...its a AX7600 from about 1977.
as far as my limited searching go's, its one of the last pure Aiwa's built before sony bought them out and sent the quality rapidly downhill.
I was aware the brand were makers of fine cassette decks around this time, but this one is a pleasant surprise.
built like a tank..inside and out. I've noted some good quality nichicon caps, thick pcb tracking and a large potted transformer.
the exterior is also well made with huge chunks of alloy for the knobs...no plastic inserts...and for some reason a removeable glass panel covering the tuner.
all this gives 40+ wpc, but it sounds more to my ears.
there is a noticeable increase in bass weight and quality over my NAD/TAG lashup...so much so that I at first thought the bass control was still in the loop when set flat.
NIGE.
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.