Lundahl LL1620 Push-Pull output transformers For Sale

[IslandPink]

For the DIY-ers, I have a pair of Lundahl LL1620 C-core ( M6 ) output transformers gathering dust at the moment . These are suitable for 300B or 2A3 class-A push pull with 6k A-A load, or PP pentode output stages in local feedback mode ( KT66/77 etc ) . Not suitable for ultralinear, though.
Various configurations acheivable by wiring options : 4, 8 or 16 Ohm output . See Lundahl site for datasheet .

These are currently wired-up for PP 300B but the wires can be unsoldered if you like .

Bought in ~2003 and used for a couple of years. Bought some fancy Bud Purvine ( O-Netics ) outputs with litz-wire secondaries etc, so these got sidelined !

Given these cost about £350/pr new, I'd be looking for something around £190 ovno.
Cheers
Mark

http://i66.tinypic.com/6r7ndl.jpg

[IslandPink]

Sorry, picked wrong url option for picture - try this :

http://i66.tinypic.com/6r7ndl.jpg

[vpgh]

hi,
are transformers available for sale?

[IslandPink]

Yes, but will cost a few quid to send to America - just be aware of that !
I can get an estimate if you like.

[vpgh]

Thanks for reply. Please provide the estimation of shipping to Pittsburgh, PA, USA 15226

[IslandPink]

PM sent.
ps. one piece of extra info - extra insurance above £50 is as per this table :
http://www.parcelforce.com/help-and-advice/sending/enhanced-compensation
Service would be 'Global Priority'.
Fist extra £100 is cheap, then a bit more for the next £100.

[IslandPink]

SOLD - many thanks Vince , will be on their way to you by Tuesday.