mikeyb
31-12-2015, 13:45
Hi,
time to get rid of the extra bits an pieces I've acquired over the last few months and are now no longer required.
First up is a JVC QL-Y5F Turntable
Works but with a couple of minor issues, it doesn't do auto cue, it powers up great, manually lift the arm and platter spins no problem, but it won't do auto start via the 'start' button, however it works no problem just cueing manually, it even lifts off the arm at end of play but doesn't return to arm rest you have to do that manually and then 'power off' to place arm back on the rest. Might be a simple fix, but I don't have the skill I'm afraid, it was bought to tide me over after selling my Gyrodec and I have to say for the money I know which was the better buy ;)
In pretty good condition although the lid has faded/coloured badly and is covered in polishing swirls but it does what it's supposed to do. I have lined the inside with Dynamat as the plinth on these is prone to resonance, it's all very clean inside and the plinth still has a nice sheen. It is however NOT mint as there are a few scratches/marks on it.
The arm rest clip has snapped off but is still there so can be glued on if needed.
Comes with a generic head-shell but no cart. I have the transport screw for the arm so can be posted in the box that my 1210 came in fully bubble wrapped and protected.
https://mikeyb.smugmug.com/Other/Odds-and-Sods/i-fpnxMW8/0/M/044-M.jpg
https://mikeyb.smugmug.com/Other/Odds-and-Sods/i-s9F2QdR/0/M/046-M.jpg
https://mikeyb.smugmug.com/Other/Odds-and-Sods/i-RMgWWRQ/0/M/045-M.jpg
https://mikeyb.smugmug.com/Other/Odds-and-Sods/i-ZSWkf38/0/M/043-M.jpg
£150.00 + Postage at cost
Yamamoto Sound Craft African Black Wood Headshell HS-1A
Complete with wooden stand - Bought this from Grant to improve the JVC TT above and it worked wonders, not suited to my 1210 TT so it must go.
https://mikeyb.smugmug.com/Other/Odds-and-Sods/i-QRkSC9X/1/M/041-M.jpg
https://mikeyb.smugmug.com/Other/Odds-and-Sods/i-WNCwcdB/0/M/040-M.jpg
£45 inc postage SOLD/DELIVERED/RECEIVED (NUFF)
Goldring 1012GX
Boxed, unknown hours but sounds good and stylus looks in good condition - but due to unknown ( it came with my Gyrodec ) use I'll let this go for......
https://mikeyb.smugmug.com/Other/Odds-and-Sods/i-wHQXhcC/1/M/037-M.jpg
£70 inc Postage
TransFi Reso-Mat ( Black )
Standard size - 300mm? - Excuse the paw prints on it lol.
https://mikeyb.smugmug.com/Other/Odds-and-Sods/i-DHzrdhW/0/M/IMG_20151231_125350-M.jpg
£25 inc postage ( will be posted in Lp packaging ) - SOLD/DELIVERED/RECEIVED (FELIX)
Marantz MCR510 Melody Stream
Streamer with Wi-Fi, AirPlay, Spotify, DLNA, Internet Radio, superb little media box with built in 2 x 60w ( 6 ohms ) amp, only selling as I already have a 2nd Pi 2 system to put in it's place and not worth having both and figured this would sell easier.
Fully boxed with remote control.
https://mikeyb.smugmug.com/Other/Odds-and-Sods/i-krP7Vvp/0/M/051-M.jpg
£125 inc Postage - SOLD ON THE WAM
Items Advertised elsewhere
time to get rid of the extra bits an pieces I've acquired over the last few months and are now no longer required.
First up is a JVC QL-Y5F Turntable
Works but with a couple of minor issues, it doesn't do auto cue, it powers up great, manually lift the arm and platter spins no problem, but it won't do auto start via the 'start' button, however it works no problem just cueing manually, it even lifts off the arm at end of play but doesn't return to arm rest you have to do that manually and then 'power off' to place arm back on the rest. Might be a simple fix, but I don't have the skill I'm afraid, it was bought to tide me over after selling my Gyrodec and I have to say for the money I know which was the better buy ;)
In pretty good condition although the lid has faded/coloured badly and is covered in polishing swirls but it does what it's supposed to do. I have lined the inside with Dynamat as the plinth on these is prone to resonance, it's all very clean inside and the plinth still has a nice sheen. It is however NOT mint as there are a few scratches/marks on it.
The arm rest clip has snapped off but is still there so can be glued on if needed.
Comes with a generic head-shell but no cart. I have the transport screw for the arm so can be posted in the box that my 1210 came in fully bubble wrapped and protected.
https://mikeyb.smugmug.com/Other/Odds-and-Sods/i-fpnxMW8/0/M/044-M.jpg
https://mikeyb.smugmug.com/Other/Odds-and-Sods/i-s9F2QdR/0/M/046-M.jpg
https://mikeyb.smugmug.com/Other/Odds-and-Sods/i-RMgWWRQ/0/M/045-M.jpg
https://mikeyb.smugmug.com/Other/Odds-and-Sods/i-ZSWkf38/0/M/043-M.jpg
£150.00 + Postage at cost
Yamamoto Sound Craft African Black Wood Headshell HS-1A
Complete with wooden stand - Bought this from Grant to improve the JVC TT above and it worked wonders, not suited to my 1210 TT so it must go.
https://mikeyb.smugmug.com/Other/Odds-and-Sods/i-QRkSC9X/1/M/041-M.jpg
https://mikeyb.smugmug.com/Other/Odds-and-Sods/i-WNCwcdB/0/M/040-M.jpg
£45 inc postage SOLD/DELIVERED/RECEIVED (NUFF)
Goldring 1012GX
Boxed, unknown hours but sounds good and stylus looks in good condition - but due to unknown ( it came with my Gyrodec ) use I'll let this go for......
https://mikeyb.smugmug.com/Other/Odds-and-Sods/i-wHQXhcC/1/M/037-M.jpg
£70 inc Postage
TransFi Reso-Mat ( Black )
Standard size - 300mm? - Excuse the paw prints on it lol.
https://mikeyb.smugmug.com/Other/Odds-and-Sods/i-DHzrdhW/0/M/IMG_20151231_125350-M.jpg
£25 inc postage ( will be posted in Lp packaging ) - SOLD/DELIVERED/RECEIVED (FELIX)
Marantz MCR510 Melody Stream
Streamer with Wi-Fi, AirPlay, Spotify, DLNA, Internet Radio, superb little media box with built in 2 x 60w ( 6 ohms ) amp, only selling as I already have a 2nd Pi 2 system to put in it's place and not worth having both and figured this would sell easier.
Fully boxed with remote control.
https://mikeyb.smugmug.com/Other/Odds-and-Sods/i-krP7Vvp/0/M/051-M.jpg
£125 inc Postage - SOLD ON THE WAM
Items Advertised elsewhere