audiolad
09-10-2009, 10:47
Just wanted to take the opportunity to say "hello" :wave:. My real name is Mike and I have come from Hifi Wigwam where I have been a member for a year or so; from what I have seen so far this seems to have the same friendly helpful atmosphere as the Wam, which is a very good thing :) !
My system, for now at least, is:
Technics SL-1200/Rega RB250/AT-120E
Rega Fono
Cyrus 6vs2
and Revolver R33 speakers
The Technics has changed somewhat over the last couple of years; it was originally bought ready modified with RB300 and tungsten weight, Origin Live armplate, and Isonoe feet. The RB300 was then replaced with a RB250 with Michell Tecnoweight, which was then replaced with Audio Origami RB251 with rewire, foam fill, and brass weight. The Isonoes and AO were sold about 6 months ago and it is now running a stock RB250 and standard feet. Although this is a backwards step in the short term, in the long term I am planning on fitting either a Jelco SA-750 or SME 309 as I have decided I would like to move away from Rega arms entirely and take things a bit more 'upmarket'. Then of course there is the PSU ...
My system, for now at least, is:
Technics SL-1200/Rega RB250/AT-120E
Rega Fono
Cyrus 6vs2
and Revolver R33 speakers
The Technics has changed somewhat over the last couple of years; it was originally bought ready modified with RB300 and tungsten weight, Origin Live armplate, and Isonoe feet. The RB300 was then replaced with a RB250 with Michell Tecnoweight, which was then replaced with Audio Origami RB251 with rewire, foam fill, and brass weight. The Isonoes and AO were sold about 6 months ago and it is now running a stock RB250 and standard feet. Although this is a backwards step in the short term, in the long term I am planning on fitting either a Jelco SA-750 or SME 309 as I have decided I would like to move away from Rega arms entirely and take things a bit more 'upmarket'. Then of course there is the PSU ...