Log in

View Full Version : Battery packs for equipment



struth
28-10-2015, 13:17
Gonna post this here even though its going to be used with an analogue product as the digi boys have been using them for a long time:eyebrows:
I am getting a xmas pressie of a 12vdc phono stage so have read it responds very well to either a linear supply or more so perhaps a battery.
So whats the best option to run it via a battery pack as i dont want a big battery sitting there in fro!t of me. Not sure what the connector size will be so one with multiple ends would be good...an on off switch a bonus
Thanks in advance folks:)

Kit1cat
28-10-2015, 13:36
Hi Grant,

I have been using this one with my pi/dac for the last couple of weeks, have also used it with my bushmaster/touch and ipad in the past.

http://www.amazon.co.uk/gp/product/B00GSLRKJO/ref=as_li_ss_tl?ie=UTF8&tag=ianker-21&linkCode=as2&camp=217145&creative=399373&creativeASIN=B00GSLRKJO

Barry

allthingsanalogue
28-10-2015, 14:53
Gonna post this here even though its going to be used with an analogue product as the digi boys have been using them for a long time:eyebrows:
I am getting a xmas pressie of a 12vdc phono stage so have read it responds very well to either a linear supply or more so perhaps a battery.
So whats the best option to run it via a battery pack as i dont want a big battery sitting there in fro!t of me. Not sure what the connector size will be so one with multiple ends would be good...an on off switch a bonus
Thanks in advance folks:)

This is what I made for my Chord 2qute dac, sounds superb. I fit a good 2 pole switch and a fuse. Bought a really good charger also.

http://i1235.photobucket.com/albums/ff430/ibiza23/AOS/C8A6C039-6B0B-4624-92A7-77A720F43192_zpsgiuo3wqu.jpg

http://i1235.photobucket.com/albums/ff430/ibiza23/AOS/327C3293-3DDA-445A-BFCD-0AC26EAF217F_zpsvchm3xeh.jpg

Much better than the suplied psu.

Wakefield Turntables
28-10-2015, 14:56
Ankaka psu should be able to do the job.

Desmo
28-10-2015, 15:02
Hi Grant,

I have been using this one with my pi/dac for the last couple of weeks, have also used it with my bushmaster/touch and ipad in the past.

http://www.amazon.co.uk/gp/product/B00GSLRKJO/ref=as_li_ss_tl?ie=UTF8&tag=ianker-21&linkCode=as2&camp=217145&creative=399373&creativeASIN=B00GSLRKJO

Barry

+1 for the Anker battery - small, powerful, and a nice neat solution. I've used mine with Caiman II DAC, Stereo Coffee LDR Pre, and Pi/iQaudiO DAC. (though not all at the same time...)

However in the end, I find that I normally use one of the Chinese eBay, linear PSU's that several of us have invested in over the past few months. I thought you had one of these Grant? - you know the ones where you can adjust the voltage using the internal multi turn pot. Set that to 12v, and then you don't have to worry about having to recharge the battery every now and then.

wee tee cee
28-10-2015, 15:03
Stan linked to a camcorder battery pack for the BM2. It worked really well for about £20. Im still using a big car battery to power my pre and dac-occasionally wandered back to the mains but battery to my ears is quite a bit cleaner.

Do you know the connector required-the wee battery pack is 2.1mm center positive ( can post it across to let you try before you buy something)

struth
28-10-2015, 15:47
Hi Grant,

I have been using this one with my pi/dac for the last couple of weeks, have also used it with my bushmaster/touch and ipad in the past.

http://www.amazon.co.uk/gp/product/B00GSLRKJO/ref=as_li_ss_tl?ie=UTF8&tag=ianker-21&linkCode=as2&camp=217145&creative=399373&creativeASIN=B00GSLRKJO

Barry

Does that come with different sized ends Barry?

struth
28-10-2015, 15:54
This is what I made for my Chord 2qute dac, sounds superb. I fit a good 2 pole switch and a fuse. Bought a really good charger also.

http://i1235.photobucket.com/albums/ff430/ibiza23/AOS/C8A6C039-6B0B-4624-92A7-77A720F43192_zpsgiuo3wqu.jpg

http://i1235.photobucket.com/albums/ff430/ibiza23/AOS/327C3293-3DDA-445A-BFCD-0AC26EAF217F_zpsvchm3xeh.jpg

Much better than the suplied psu.

Yeah thats the car battery way i guess Andrew. Think a few have done something like that. Maybe a bit too much wires as im trying to simplify.

struth
28-10-2015, 15:57
Ankaka psu should be able to do the job.

Cheers Andy


+1 for the Anker battery - small, powerful, and a nice neat solution. I've used mine with Caiman II DAC, Stereo Coffee LDR Pre, and Pi/iQaudiO DAC. (though not all at the same time...)

However in the end, I find that I normally use one of the Chinese eBay, linear PSU's that several of us have invested in over the past few months. I thought you had one of these Grant? - you know the ones where you can adjust the voltage using the internal multi turn pot. Set that to 12v, and then you don't have to worry about having to recharge the battery every now and then.

I did have one but it went to Brian... Should have kept it:doh: yes one of them or an anker pack seems the best option. Alas the anker doent say if it comes with assorted ends



Stan linked to a camcorder battery pack for the BM2. It worked really well for about £20. Im still using a big car battery to power my pre and dac-occasionally wandered back to the mains but battery to my ears is quite a bit cleaner.

Do you know the connector required-the wee battery pack is 2.1mm center positive ( can post it across to let you try before you buy something)

Alas I dont. I imagine it will be a 2.1 or similar but wont know till it comes Tony

Kit1cat
28-10-2015, 16:04
Does that come with different sized ends Barry?

Just the cables mentioned on Amazon.


What You Get: Anker 2nd Gen Astro Pro2 Portable Charger External Battery Power Bank, 100-240 volt adapter, Micro USB cable, 4.3 × 1.6mm to 5.5 × 2.5mm multi-voltage cable, travel pouch, welcome guide, our fan-favorite 18-month warranty and friendly customer service.

struth
28-10-2015, 16:26
Ah ok.. So a 5.5 to multi end cable would likely solve that then...cheers

allthingsanalogue
28-10-2015, 17:08
Hi Grant

This battery is a SLA type and about the size of a house brick so not as bad as a car battery.

http://www.ebay.co.uk/itm/111128215478?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

Sounds wonderful! Been playing since 10 this morning and it's now 17:10 as I'm writing this, still going strong!

struth
28-10-2015, 17:11
Ive got a couple of 12v disability scooter batteries in the shed now that I think of it...had forgotten about them they have a fair amount of current in them.....hummm

allthingsanalogue
28-10-2015, 17:25
Ive got a couple of 12v disability scooter batteries in the shed now that I think of it...had forgotten about them they have a fair amount of current in them.....hummm

Well this one is 12Ah, so at 0.5a consumption it should be a good 18-20 hours without having to completely discharge the battery.

struth
28-10-2015, 17:42
Thanks for all the info folks... I will also consider one of those linear psu's I had b4 if I can remember where I got it... Brian just sold one tae :doh: I knew I should have bought it lol... think this thing only uses 100mv so its not a big drain on a battery... will see what size is on it when he gets it, b4 he wraps it up. that will help. its amazon USA its coming from so hopefully it wont be too long. I saw one of those power packs that had all the connectors but cant find it either... bloody old age;)

StanleyB
28-10-2015, 18:36
Gonna post this here even though its going to be used with an analogue product as the digi boys have been using them for a long time:eyebrows:
I am getting a xmas pressie of a 12vdc phono stage so have read it responds very well to either a linear supply or more so perhaps a battery.
And there was me hoping to tempt you with my own design of a digital/analogue phono preamp.

struth
28-10-2015, 18:57
And there was me hoping to tempt you with my own design of a digital/analogue phono preamp.

I didnt know you did one Stan. when did this come out?

What was that big one that folk were using for the dacs and headamps a while ago, or is that off the market now..... Currently got it down to 2 different battery packs or a linear supply

WAD62
28-10-2015, 19:07
Hi Grant,

I have been using this one with my pi/dac for the last couple of weeks, have also used it with my bushmaster/touch and ipad in the past.

http://www.amazon.co.uk/gp/product/B00GSLRKJO/ref=as_li_ss_tl?ie=UTF8&tag=ianker-21&linkCode=as2&camp=217145&creative=399373&creativeASIN=B00GSLRKJO

Barry
+2 for me (I have a couple), running 2 pi DACs from these, and you can charge whilst playing...:)

Didn't realise the 20000 was back in stock, I shall order another...

EDIT: Ordered, I'll use this one with my Caiman II and Capella combo...:D

struth
29-10-2015, 22:48
considering one of these.... could double as a psu for the RPI as well

http://www.ebay.co.uk/itm/321734673980?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

http://i.ebayimg.com/00/s/NTk2WDgwMA==/z/fX4AAOSwuMFUhR8h/$_57.JPG

allthingsanalogue
30-10-2015, 11:10
considering one of these.... could double as a psu for the RPI as well

http://www.ebay.co.uk/itm/321734673980?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

http://i.ebayimg.com/00/s/NTk2WDgwMA==/z/fX4AAOSwuMFUhR8h/$_57.JPG

Nice!

Rothchild
30-10-2015, 12:35
considering one of these.... could double as a psu for the RPI as well

http://www.ebay.co.uk/itm/321734673980?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

http://i.ebayimg.com/00/s/NTk2WDgwMA==/z/fX4AAOSwuMFUhR8h/$_57.JPG

I've had one of those sitting in my basket for ages now, just not got to pulling the trigger on it - let us know how you get on if you do go for it.