Ammonite Audio
20-04-2015, 16:54
I bought this to go on my TD-124, but that's probably not going to happen, so it needs a new home.
This is the fixed headshell SME 3009 Series II Improved, which I had re-wired and checked over by Audio Origami. I also made up a new signal cable for it, using the original 4 pin plug, Van Damme cable and Neutrik Rean RCA plugs. The old SME cable is included for anyone wanting strict originality. Johnnie at Audio Origami advised me to keep the SME 4-pin connector since it's nice and clean and probably just as good as an RCA conversion, if not better.
It's complete, with all the weights, anti-skate gubbins, handbook and mounting template. The bits and bobs are not shown attached to the arm, but they are all there in the plastic bags. I don't have an original box but it will be very well packed.
I'd like £225 for it, including UK delivery (extra for international delivery).
http://i155.photobucket.com/albums/s301/hugocass/SME%203009/IMGP1490_zpsrbd6qw7z.jpg
http://i155.photobucket.com/albums/s301/hugocass/SME%203009/IMGP1489_zpslovpzcxu.jpg
http://i155.photobucket.com/albums/s301/hugocass/SME%203009/IMGP1488_zpska4ai2ia.jpg
I know that the tonearm plug cover is on the wrong way in this picture - it's now seated properly!
This is the fixed headshell SME 3009 Series II Improved, which I had re-wired and checked over by Audio Origami. I also made up a new signal cable for it, using the original 4 pin plug, Van Damme cable and Neutrik Rean RCA plugs. The old SME cable is included for anyone wanting strict originality. Johnnie at Audio Origami advised me to keep the SME 4-pin connector since it's nice and clean and probably just as good as an RCA conversion, if not better.
It's complete, with all the weights, anti-skate gubbins, handbook and mounting template. The bits and bobs are not shown attached to the arm, but they are all there in the plastic bags. I don't have an original box but it will be very well packed.
I'd like £225 for it, including UK delivery (extra for international delivery).
http://i155.photobucket.com/albums/s301/hugocass/SME%203009/IMGP1490_zpsrbd6qw7z.jpg
http://i155.photobucket.com/albums/s301/hugocass/SME%203009/IMGP1489_zpslovpzcxu.jpg
http://i155.photobucket.com/albums/s301/hugocass/SME%203009/IMGP1488_zpska4ai2ia.jpg
I know that the tonearm plug cover is on the wrong way in this picture - it's now seated properly!