nikita
19-04-2015, 15:57
Hi All,
A little bit stuck on this one and don't want to damage anything through ignorance :-)
Right so I got the speakers, amp and subwoofer below. Question that I need an answer to is it safe me using the amp for this speakers. Seems a bit underpowered and I don’t want to damage speakers by "clipping".
I used to have a bigger amp but no longer and I don’t know if it enough power to pull the 4 speakers and the sub? I am thinking if something like a Audiolab 8200X7 7 Channel Power Amplifier would be more appropriate?
Harman Kardon HK3490 stereo receiver
120 Watts per channel 20Hz-20kHz@<0.07% THD both channels driven into 8ohms
Signal to Noise (IHF-A) Ration 95dB
And speakers:
2XWharfedale Diamond 10.5
Suitable Amplifier Power 20-120 Watts
Impedance (Nominal) 6Ω
A/V Shield no
Sensitivity 86dB
2XWharfedale Diamond 10.6
Suitable Amplifier Power 20-150 Watts
Impedance (Nominal) 6Ω
A/V Shield no
Sensitivity 88dB
Wharfedale Subwoofer Diamond 10.GX-SUB
Bass Driver 1x250mm
USB 5V Ouput No
Amplifier Power 250W
Line Input Sensitivity 325mV for 150W
Avg. Max Output @ 1m 113dB
Boundary Response 30Hz - 100Hz
Crossover Range 35Hz - 85Hz (6x10dB steps)
Any help, advice and opinions are most welcome.
Regards,
Nikita
A little bit stuck on this one and don't want to damage anything through ignorance :-)
Right so I got the speakers, amp and subwoofer below. Question that I need an answer to is it safe me using the amp for this speakers. Seems a bit underpowered and I don’t want to damage speakers by "clipping".
I used to have a bigger amp but no longer and I don’t know if it enough power to pull the 4 speakers and the sub? I am thinking if something like a Audiolab 8200X7 7 Channel Power Amplifier would be more appropriate?
Harman Kardon HK3490 stereo receiver
120 Watts per channel 20Hz-20kHz@<0.07% THD both channels driven into 8ohms
Signal to Noise (IHF-A) Ration 95dB
And speakers:
2XWharfedale Diamond 10.5
Suitable Amplifier Power 20-120 Watts
Impedance (Nominal) 6Ω
A/V Shield no
Sensitivity 86dB
2XWharfedale Diamond 10.6
Suitable Amplifier Power 20-150 Watts
Impedance (Nominal) 6Ω
A/V Shield no
Sensitivity 88dB
Wharfedale Subwoofer Diamond 10.GX-SUB
Bass Driver 1x250mm
USB 5V Ouput No
Amplifier Power 250W
Line Input Sensitivity 325mV for 150W
Avg. Max Output @ 1m 113dB
Boundary Response 30Hz - 100Hz
Crossover Range 35Hz - 85Hz (6x10dB steps)
Any help, advice and opinions are most welcome.
Regards,
Nikita