Tdl rtl3 speaker upgrade???

[3dave2]

Hi Everyone, Just getting the urge to upgrade my TDL RTL3s (older Model) Square ports.
Trying to gather information from anyone on the threads who have already successfully found a difference
from upgrading. I have been informed that changing the capacitors are a must. Line the cabinets.refit the wadding.
possibly change the tweeters....( I was informed a larger dome may not be the best move for this).
Replace the capacitors with polypropylenes.
I believe these speakers are in my opinion worth holding onto...better than some that I have listened to.
They sound better ( sound staging and colour in a larger room). I now have them in my small office/studio den as
her indoors falls over them in our large sitting room:scratch:
I am concerned regarding carrying out this task myself...So some guided help would be appreciated.
Kind regards Dave.

[Eagle owl]

Hello and welcome David.

Geoff. :wave:

[3dave2]

not had any replies yet,,perhaps a bit early. Dave.

[struth]

Hi Everyone, Just getting the urge to upgrade my TDL RTL3s (older Model) Square ports.
Trying to gather information from anyone on the threads who have already successfully found a difference
from upgrading. I have been informed that changing the capacitors are a must. Line the cabinets.refit the wadding.
possibly change the tweeters....( I was informed a larger dome may not be the best move for this).
Replace the capacitors with polypropylenes.
I believe these speakers are in my opinion worth holding onto...better than some that I have listened to.
They sound better ( sound staging and colour in a larger room). I now have them in my small office/studio den as
her indoors falls over them in our large sitting room:scratch:
I am concerned regarding carrying out this task myself...So some guided help would be appreciated.
Kind regards Dave.

Hi dave, welcome aboard. Your post really should be made in Black canvas if you want any likely replies. This area is for introducing yourself and such. Perhaps if you copy the relevant parts and put them in a thread in the correct section then the members will see it
regards Grant

[3dave2]

Hi Grant. Thank you. have moved my enquiry. hope that I get a result.

kind regards Dave.