View Full Version : Unshielded Interconnects
Can anyone recommend an Unshielded interconnect. If anyone has a second hand one they want to sell I may be interested, looking for 1.5 metres.
walpurgis
07-08-2014, 20:40
Townshend Isolda are unscreened (at least mine were) and come in various lengths. Decent cable.
brian2957
07-08-2014, 20:46
These are pretty good IMO http://www.mains-cables-r-us.co.uk/analogue-interconnects-/596-black-rhodium-twist-stereo-interconnects.html
Why don't you make your own? Needn't be expensive.
brian2957
08-08-2014, 17:02
True and you won't have to leave the shield disconnected :lol:
anthonyTD
08-08-2014, 17:05
Hi All,
I have a few pairs of Isolda interconect cables hanging around if anyone is interested.
A...
Why don't you make your own? Needn't be expensive.
+1 on that. I have made my own and it is blindingly easy. This is what I did:
Purchase:
- 4x Furutech FT-111G (about £50)
- 6 meters of 24 AWG audiophile grade silver (about £40)
- 6 meters of teflon tubing, say about 2 mm internal diameter (about £1)
Points to Note:
- You will need no solder as these are connected via set-screw.
- Although unshielded you can twist them gently.
Sound quality:
Look up Oyaide AZ-910, Oyaide's best interconnect. It retails for over US$800 for a 1.3 meter pair. This is what my home-brew replaced. They are a crystal clear step up from the Oyaide AZ-910. Why are they better? can't say for sure but I put it down to the Furutech RCA plugs. They bettered Xhadow and Oyaide's plugs that I used in former attempts.
+1 on that. I have made my own and it is blindingly easy. This is what I did:
Purchase:
- 4x Furutech FT-111G (about £50)
- 6 meters of 24 AWG audiophile grade silver (about £40)
- 6 meters of teflon tubing, say about 2 mm internal diameter (about £1)
Points to Note:
- You will need no solder as these are connected via set-screw.
- Although unshielded you can twist them gently.
Sound quality:
Look up Oyaide AZ-910, Oyaide's best interconnect. It retails for over US$800 for a 1.3 meter pair. This is what my home-brew replaced. They are a crystal clear step up from the Oyaide AZ-910. Why are they better? can't say for sure but I put it down to the Furutech RCA plugs. They bettered Xhadow and Oyaide's plugs that I used in former attempts.
Interesting, do you have a build blog Andrei.:)
:popcorn:
Interesting, do you have a build blog Andrei.:)
:popcorn:
No I don't have a build blog. It truly is very simple. The only tool you need is a small screwdriver. You don't even need tools like a vice or 'third hand'.
If interested I could put up a few pics over the weekend.
No I don't have a build blog. It truly is very simple. The only tool you need is a small screwdriver. You don't even need tools like a vice or 'third hand'.
If interested I could put up a few pics over the weekend.
Ta Andrei.:eek:
I have put up a blog and some pics here
http://theartofsound.net/forum/showthread.php?33823-Geisha-Interconnect
I have put up a blog and some pics here
http://theartofsound.net/forum/showthread.php?33823-Geisha-Interconnect
Cheers Andrei, great post.
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.