FS: Lenco plinth

[surayne]

I made this plinth but have now gone down the slate / PTP route, so this is no longer needed. It's made out of 5 layers of high-quality 18mm birch plywood that have been glued together. The top plate was cut down and the plinth cut to allow the linkage for the power switch to work. The top plate, switch and linkage for the power switch will be included. There is a cutout at the back to allow insertion of an IEC connection for power. The top of the plinth was cut for a 12" Ortofon tonearm, but this cutout could probably be modified to take an SME or Jelco. The plinth measures 52 x 42 cm.

Please note that as the plinth sinks the platter into the first layer of wood, you will probably need to stack platters to allow for correct VTA - that's how I used it temporarily, at least. You may also need to sand the cutout for the top plate to make it fit a little better - I was going to screw it down once the project was complete but never got to that stage. I used

Some pictures:

http://i1135.photobucket.com/albums/m633/surayne/Lenco%20restoration/DSC_0158.jpg (http://s1135.photobucket.com/user/surayne/media/Lenco%20restoration/DSC_0158.jpg.html)

http://i1135.photobucket.com/albums/m633/surayne/Lenco%20restoration/DSC_0160.jpg (http://s1135.photobucket.com/user/surayne/media/Lenco%20restoration/DSC_0160.jpg.html)

http://i1135.photobucket.com/albums/m633/surayne/Lenco%20restoration/DSC_0161.jpg (http://s1135.photobucket.com/user/surayne/media/Lenco%20restoration/DSC_0161.jpg.html)

http://i1135.photobucket.com/albums/m633/surayne/Lenco%20restoration/DSC_0162.jpg (http://s1135.photobucket.com/user/surayne/media/Lenco%20restoration/DSC_0162.jpg.html)

http://i1135.photobucket.com/albums/m633/surayne/Lenco%20restoration/DSC_0164.jpg (http://s1135.photobucket.com/user/surayne/media/Lenco%20restoration/DSC_0164.jpg.html)

http://i1135.photobucket.com/albums/m633/surayne/Lenco%20restoration/DSC_0119.jpg (http://s1135.photobucket.com/user/surayne/media/Lenco%20restoration/DSC_0119.jpg.html)

I'd like £50 collected from Surrey, just off J11 on the M25. I suppose this could be posted but it's big and heavy, and would likely cost a fortune.