NRG
03-03-2014, 20:16
For Sale my Ortofon Rondo Bronze MC Cartridge. I bought this cartridge as a backup to my Kontrapunkt B but Ive hardly had any need to use it, I estimate its had under 50 hours of use. See pictures of stylus and cantilever. Heres the spec:
Output voltage at 1000 Hz, 5cm/sec.: 500 ΅V
Channel balance at 1 kHz: 1 dB
Channel separation at 1 kHz: 25 dB
Channel separation at 15 kHz: 18 dB
Frequency range: 20-40,000 Hz
Frequency response: 20-20,000 Hz ±1,5 dB
FIM distortion at recommended tracking force, DIN 45.542: < 1%
Tracking ability at 315Hz at recommended tracking force: 90 ΅m
Compliance, dynamic, lateral: 15 ΅m/mN
Stylus type: Nude FG80, tapered Al. cantilever
Stylus tip radius: r/R 5/80 ΅m
Equivalent stylus tip mass: 0.30 mg
Tracking force range: 2-2.5 g (20-25 mN)
Tracking force, recommended: 2.3 g (23 mN)
Tracking angle: 20°
Internal impedance, DC resistance: 6 Ohm
Recommended load impedance: 10-200 Ohm
Cartridge body material: Grinded wood/Resin comp.
Cartridge colour: Bronze
Cartridge weight: 10.5g
Im located in South Bucks if you wish to meet and collect or I can ship as necessary.
Im looking for £295 plus shipping.
http://i94.photobucket.com/albums/l82/_NRG_/Ebay/DSCF7317.jpg[/URL]
http://i94.photobucket.com/albums/l82/_NRG_/Ebay/DSCF7318.jpg[/URL]
http://i94.photobucket.com/albums/l82/_NRG_/Ebay/DSCF7326.jpg[/URL]
http://i94.photobucket.com/albums/l82/_NRG_/Ebay/DSCF7327.jpg[/URL]
http://i94.photobucket.com/albums/l82/_NRG_/Ebay/DSCF7329.jpg[/URL]
Output voltage at 1000 Hz, 5cm/sec.: 500 ΅V
Channel balance at 1 kHz: 1 dB
Channel separation at 1 kHz: 25 dB
Channel separation at 15 kHz: 18 dB
Frequency range: 20-40,000 Hz
Frequency response: 20-20,000 Hz ±1,5 dB
FIM distortion at recommended tracking force, DIN 45.542: < 1%
Tracking ability at 315Hz at recommended tracking force: 90 ΅m
Compliance, dynamic, lateral: 15 ΅m/mN
Stylus type: Nude FG80, tapered Al. cantilever
Stylus tip radius: r/R 5/80 ΅m
Equivalent stylus tip mass: 0.30 mg
Tracking force range: 2-2.5 g (20-25 mN)
Tracking force, recommended: 2.3 g (23 mN)
Tracking angle: 20°
Internal impedance, DC resistance: 6 Ohm
Recommended load impedance: 10-200 Ohm
Cartridge body material: Grinded wood/Resin comp.
Cartridge colour: Bronze
Cartridge weight: 10.5g
Im located in South Bucks if you wish to meet and collect or I can ship as necessary.
Im looking for £295 plus shipping.
http://i94.photobucket.com/albums/l82/_NRG_/Ebay/DSCF7317.jpg[/URL]
http://i94.photobucket.com/albums/l82/_NRG_/Ebay/DSCF7318.jpg[/URL]
http://i94.photobucket.com/albums/l82/_NRG_/Ebay/DSCF7326.jpg[/URL]
http://i94.photobucket.com/albums/l82/_NRG_/Ebay/DSCF7327.jpg[/URL]
http://i94.photobucket.com/albums/l82/_NRG_/Ebay/DSCF7329.jpg[/URL]