synsei
27-11-2013, 18:51
Vinyl records are thin and flexible and often warped or bowed. As most records do not lie flat on the turntable platter, sound reproduction suffers due to undamped vinyl resonances caused by the stylus riding on an unsupported record. Records, which are bowed downwards, contact the platter at the outer edge but not in the middle. Conversely, records which are warped or bowed upwards tend to rock on the platter. In these instances anti-skating compensation is less effective and record wear is increased substantially by the lateral or vertical seesawing motion of the tonearm/cartridge combination. The Mitchell Record Clamp solves these problems by bringing the record into more intimate contact with the platter. The main (black) body of the record clamp is manufactured from Delrin and the knurled locking knob is aluminium.
http://i1019.photobucket.com/albums/af316/Sgtgrash/Hifi%20Stuff/AoS%20TT%20Bits%20FS/2013-11-27142422.jpg (http://s1019.photobucket.com/user/Sgtgrash/media/Hifi%20Stuff/AoS%20TT%20Bits%20FS/2013-11-27142422.jpg.html)
How It Works:
The supplied black felt washer is placed on the spindle. Then place the record on the platter. When a record is placed over the washer, the record label area will remain raised slightly. Now place the clamp on the record, press and turn the knurled knob clockwise to lock the unit. The record clamp's peripheral edge will force down the outside of the record label area thereby causing the record to completely contact the platter surface. To remove the clamp, it is only necessary to turn the knob 1/8 turn counterclockwise. The knob does not have to be unscrewed completely.
£25 including p&p within the UK (Please contact me for international postage details)
Thank You... :)
http://i1019.photobucket.com/albums/af316/Sgtgrash/Hifi%20Stuff/AoS%20TT%20Bits%20FS/2013-11-27142422.jpg (http://s1019.photobucket.com/user/Sgtgrash/media/Hifi%20Stuff/AoS%20TT%20Bits%20FS/2013-11-27142422.jpg.html)
How It Works:
The supplied black felt washer is placed on the spindle. Then place the record on the platter. When a record is placed over the washer, the record label area will remain raised slightly. Now place the clamp on the record, press and turn the knurled knob clockwise to lock the unit. The record clamp's peripheral edge will force down the outside of the record label area thereby causing the record to completely contact the platter surface. To remove the clamp, it is only necessary to turn the knob 1/8 turn counterclockwise. The knob does not have to be unscrewed completely.
£25 including p&p within the UK (Please contact me for international postage details)
Thank You... :)