PDA

View Full Version : Wanted - Ortofon FF15e or VMS 5e or 10e stylus



DSJR
26-05-2013, 15:32
Yes folks, my latest SPU basher :lol:

Seriously, my Garrard Zero 100 doesn't like the higher compliance magnetics I have and the Rega R100 is a bit too tall. What I'd like to fit to this deck is something a little "lower" and livelier in balance and with 1.75 - 2g tracking. The above Ortofons should fit the bill perfectly I think and look far better with the arm than the OM series. Sadly, I gave away my last complete VMS5e and the VMS30 I have isn't suitable for this deck. I'm too much of a penny-pincher to buy a new stylus as proper Ortofon-made replacements cost as much as the deck did and since this is a fun project, I really don't want to spend much.

Have any of you chaps got one of these, stylus preferably since I have bodies, I could have for a modest sum? I know, I should practise what I preach and fit the Rega Carbon, but I thought I'd ask here first :)

synsei
26-05-2013, 15:44
Okay it is not an original stylus Dave but if you are willing to take a punt for a little under twelve quid then this (http://www.ebay.co.uk/itm/Stylus-for-Ortofon-D10-F15-FF15-N15-VMS-PL120-needle-/350422032605?pt=Turntable_Parts_Accessories&hash=item5196c7e0dd) may suit :)

http://i.ebayimg.com/t/Stylus-for-Ortofon-D10-F15-FF15-N15-VMS-PL120-needle-/07/!Bd8BBBwBGk~$(KGrHqYH-EQErgv!IWRgBK7LNfbUeg~~_12.JPG

DSJR
26-05-2013, 16:15
Thanks - I've seen these and at present, don't really want to go there since I strongly suspect the AT91/Carbon, conical tip and all, will be better.....

walpurgis
26-05-2013, 16:52
I have a good FF15E Mk.II cartridge not in use. Interested?

I also have a VMS30 Mk.II cartridge spare, but that would obviously be rather dearer.



Just had a rummage and found a spare VMS5E Mk.II stylus which should fit too.

DSJR
26-05-2013, 18:26
PM sent :)