MCRU
17-04-2013, 21:42
Supplied a few already wired up but as most folks like a bargain and save money by doing it themselves here is the set to buy to wire up yourself.
The AG500 is just like most of the Furman power conditioners in that it has IEC sockets to connect your mains leads to so you need a male IEC on one end and a female IEC on the other end, help is at hand....
http://i622.photobucket.com/albums/tt309/themainsman/ADS/maleiec_zpsf39d3f07.jpg
1 x Female Martin Kaiser IEC Connector De-0xit Treated
1 x Male Martin Kaiser IEC Connector De-Oxit Treated
1.5 Metres of Belden 19364 Shielded Mains Cable
10 silver plated cable crimping sleeves
£25.00 per set inc. postage in the UK.
The postage will cost about £3+ and the jiffy bag so bit of a bargain to get it all from one place ready to wire up
You can buy it all individually from various places but most have min. order charges and postage is quite high. I stock 100's of metres of belden and have both connector types on the shelf.
The belden cable has a drain wire which connects to the earth pin of the IEC at the AG500 end and is cut off at the equipment end to form a faraday cage to keep mains noise away from the equipment and prevent the cable from acting as an aerial picking up RFI. I must have sold at least 1000 metres of this cable and it has to rank as the best value for money mains cable currently available and has been going for over 20 years (originally disocovered by Bob Crump of TG Audio Labs and named the Asylum Cable after The Audio Asylum Forum)
http://i622.photobucket.com/albums/tt309/themainsman/Belden%2019364/DSCF3908-1-1.jpg
The belden cable fits the IEC's with little modification, if you prefer the LAPP cable it is the same price, please pm to order.
The AG500 is just like most of the Furman power conditioners in that it has IEC sockets to connect your mains leads to so you need a male IEC on one end and a female IEC on the other end, help is at hand....
http://i622.photobucket.com/albums/tt309/themainsman/ADS/maleiec_zpsf39d3f07.jpg
1 x Female Martin Kaiser IEC Connector De-0xit Treated
1 x Male Martin Kaiser IEC Connector De-Oxit Treated
1.5 Metres of Belden 19364 Shielded Mains Cable
10 silver plated cable crimping sleeves
£25.00 per set inc. postage in the UK.
The postage will cost about £3+ and the jiffy bag so bit of a bargain to get it all from one place ready to wire up
You can buy it all individually from various places but most have min. order charges and postage is quite high. I stock 100's of metres of belden and have both connector types on the shelf.
The belden cable has a drain wire which connects to the earth pin of the IEC at the AG500 end and is cut off at the equipment end to form a faraday cage to keep mains noise away from the equipment and prevent the cable from acting as an aerial picking up RFI. I must have sold at least 1000 metres of this cable and it has to rank as the best value for money mains cable currently available and has been going for over 20 years (originally disocovered by Bob Crump of TG Audio Labs and named the Asylum Cable after The Audio Asylum Forum)
http://i622.photobucket.com/albums/tt309/themainsman/Belden%2019364/DSCF3908-1-1.jpg
The belden cable fits the IEC's with little modification, if you prefer the LAPP cable it is the same price, please pm to order.