PDA

View Full Version : Kab 1210 arm and damper


DiveDeepDog
09-03-2013, 23:38
Due to the replacement with a Nima, I have for sale Kab rewired 1210 tonearm. Internal (Cardas ?) + external Van Damme. The external cable is DIY, but professionally fitted phono cables. ( I bought 2 patch cables to make 2 separate arm leads. )

Kab damper, complete and boxed. Silicone wrapped within cling film, there should be enough to get going.

Sumiko heavy headshell. Includes the finger lift, I've borrowed it temporarily .

I'm selling on behalf of Andy Cotteril, I physically have the tonearm, and will deal with postage/money. Deals and questions may take a little longer.

Prices, best guess is £150 + P&P for the lot. I'll give it a week in the hope of a complete sale.

Otherwise
£90 for the arm
£65 Damper
£28 Headshel

+ postage.
http://farm9.staticflickr.com/8244/8542451797_5eea3a9ed8_c.jpg (http://www.flickr.com/photos/49381909@N08/8542451797/)
DSC_2089 (http://www.flickr.com/photos/49381909@N08/8542451797/) by levs the diver (http://www.flickr.com/people/49381909@N08/), on Flickr
http://farm9.staticflickr.com/8087/8543551808_0b2b4e07db_c.jpg (http://www.flickr.com/photos/49381909@N08/8543551808/)
DSC_2084 (http://www.flickr.com/photos/49381909@N08/8543551808/) by levs the diver (http://www.flickr.com/people/49381909@N08/), on Flickr
WOStantonCS100
10-03-2013, 00:06
Where's the other part of the arm lifter?
Wakefield Turntables
10-03-2013, 10:44
Where's the other part of the arm lifter?

Its the top picture picture in the 1st post :scratch:
DiveDeepDog
10-03-2013, 13:09
Just popped into Asda, I'm struggling with wi-fi.

The original arm lift is in the damper box, so will be included with the arm.
No orriginal headshell. The Sumiko is much better :-)
WOStantonCS100
10-03-2013, 18:17
Its the top picture picture in the 1st post :scratch:

This is what I was talking about... but, if I understand correctly, it was removed and will be included in the box with the damper?

http://i815.photobucket.com/albums/zz80/TCKA1ESa/armlifter.jpg
DiveDeepDog
10-03-2013, 18:30
Yes, it was removed to fit the damper.
It is in the box.

Andy has to check his loft for the original arm box, but if not found I am known for my bomb proof wrapping :-)
WOStantonCS100
10-03-2013, 20:31
Yes, it was removed to fit the damper.
It is in the box.

Andy has to check his loft for the original arm box, but if not found I am known for my bomb proof wrapping :-)

Ahhh... ok?

Side note (for potential buyers): The "lift rail" does not actually have to be removed for the damper to fit, as designed. Indeed on my stock arm, both coincide peacefully and neither affects the functionality of the other.

http://www.kabusa.com/GIF/td1200a.jpg
DiveDeepDog
10-03-2013, 23:45
I've just had a look, I agree no need to remove the lifter, I've screwed it back on.
StuN
11-03-2013, 16:34
I would like the Damper please!
DiveDeepDog
11-03-2013, 17:16
Pm sent, still prefer to as a package, but your first in line if sold seperatly
DiveDeepDog
15-03-2013, 15:42
Bump for the package deal, will be splitting on Sunday

The internal / external rewire brings plenty to the party.
External Van Damme silver plaited XKE cable, very similar to the AO cable at over £100.


( StuN has first dibs on the damper)
DiveDeepDog
17-03-2013, 21:18
Damper sold to Stu, thank you for patience and payment:thumbsup:

Arm and Sumiko headshell still available