wtd - vibrapods or sorbothone

[scotty67]

I'd like to try some vibrapods or similar under a Pure Sound A8000 CD player I'm trying.

Not looking to spend much as doubtful if will make a difference.

Suggestions welcome.

why lying unused?

Cheers

kev

[Wakefield Turntables]

I can supply you with some nice thick 6mm sorbothane if your interested. I work with the stuff so should be able to get you some nice cuts for mates rates :eyebrows:

[Rare Bird]

The baseboard on my TT has a Sorby sheet sandwiched between two pieces of Ply. :D

[scotty67]

I can supply you with some nice thick 6mm sorbothane if your interested. I work with the stuff so should be able to get you some nice cuts for mates rates :eyebrows:

Hi Andrew, how much for enough to stick under the CD player?
Cheers, kev

[scotty67]

The baseboard on my TT has a Sorby sheet sandwiched between two pieces of Ply. :D

Ha! Just bought some marine ply this morning for sticking under tt.

[da2222]

Hi... I've got 2 sets of vibrapods unopened in original packaging.... 2 x 4. I use another set under cd and they do a good job. Drop me a pm if interested

[Wakefield Turntables]

Hi Andrew, how much for enough to stick under the CD player?
Cheers, kev

If you send me some measurement I can get you a quote. Its quite heavy stuff so it may cost a few pounds to send it, you will see if you purchase some. Best bet is to send me a PM with what you want;)

[Rare Bird]

Kev:

Don't you know anyone with an old Mission 'Isoplat' ?

[scotty67]

Now sorted, thanks to all:)

[archiesdad]

Kev:
Don't you know anyone with an old Mission 'Isoplat' ?
I have two, marked Cyrus but both are in use at the mo..

[scotty67]

I have been advised that CORK is as good as anything! Worth a go:scratch:

[Spectral Morn]

RDC cones. One under the mech, one under the transformer and one to balance it. Sorbothane works for some things but in my opinion the RDC cones will work wonders.