Barry
28-01-2013, 18:56
After an enquiry made by a new member concerning the Decca ‘Green’ cartridge, the following might be of interest.
The Decca 'Green' is a monophonic cartridge ‘head’ made by Decca as part of their ffrr / ffss range (from the Mk.I to the Mk.III designs).
http://i780.photobucket.com/albums/yy88/barrydhunt/deccalondongreen1_zps9c281fee.jpg
(Image: vinylengine)
Vinylengine quote the following specification:
Output: 7.5mV
Response 20Hz – 20kHz
VTF: 2 – 3g
Recommended load impedance: 50kΩ
Coil resistance: 4.4kΩ
Spherical tip radius: 0.0006/7" (though according to a Decca leaflet, this radius is stated to be 0.0009")
Compliance: 12cu (stated to be the dynamic compliance. I believe this is the static compliance, not the dynamic compliance.)
Decca also state in their leaflet on ffss stereo heads, the following:
Mono Microgrove Head
The stereophonic heads track perfectly well on all monophonic/microgroove records in good condition. The mono microgroove head is produced for -
(A) those who wish to use monophonic only system, or
(B) those who have many of the older type of microgroove records which have been worn by a pick-up of poor performance.
They also state the recommended playing weight is 3 grammes.
The Decca 'Green' is a monophonic cartridge ‘head’ made by Decca as part of their ffrr / ffss range (from the Mk.I to the Mk.III designs).
http://i780.photobucket.com/albums/yy88/barrydhunt/deccalondongreen1_zps9c281fee.jpg
(Image: vinylengine)
Vinylengine quote the following specification:
Output: 7.5mV
Response 20Hz – 20kHz
VTF: 2 – 3g
Recommended load impedance: 50kΩ
Coil resistance: 4.4kΩ
Spherical tip radius: 0.0006/7" (though according to a Decca leaflet, this radius is stated to be 0.0009")
Compliance: 12cu (stated to be the dynamic compliance. I believe this is the static compliance, not the dynamic compliance.)
Decca also state in their leaflet on ffss stereo heads, the following:
Mono Microgrove Head
The stereophonic heads track perfectly well on all monophonic/microgroove records in good condition. The mono microgroove head is produced for -
(A) those who wish to use monophonic only system, or
(B) those who have many of the older type of microgroove records which have been worn by a pick-up of poor performance.
They also state the recommended playing weight is 3 grammes.