PDA

View Full Version : My Refuge



GT Audio Works
09-10-2012, 12:29
MY GTA 2 Loudspeakers and a modest setup of Bryston 4b amp Audible Illusions L1 pre amp and DIY room treatments.

Martinh
09-10-2012, 13:00
I like the way you've built your speakers into a pair of wardrobes.

Good sound and also somewhere to hang your clothes :)

Cheers,

GT Audio Works
09-10-2012, 13:12
I like the way you've built your speakers into a pair of wardrobes.

Good sound and also somewhere to hang your clothes :)

Cheers,You should see the Beer Tap built into the sub !!
Greg

jason
09-10-2012, 19:52
That's a nice set up and room Greg, respect for the acoustic panels.

Jason.

GT Audio Works
09-10-2012, 19:59
That's a nice set up and room Greg, respect for the acoustic panels.

Jason.They were cheap to make about $150 USD for 7 panels.

RichB
09-10-2012, 20:34
I like how you'd have to fight your way past one of those daleks to get out of that door.:lol:
Very nice mate, the only thing similar I ever heard was a pair of martin logans. How to they compare, am I even close?

GT Audio Works
09-10-2012, 23:10
I like how you'd have to fight your way past one of those daleks to get out of that door.:lol:
Very nice mate, the only thing similar I ever heard was a pair of martin logans. How to they compare, am I even close?Thanks Rich,
That door leads to my hot water heater, so we don't go back there very often.
Yes, they sound a bit like ML electrostatics having a great mid range and very transparent and open sound stage, but a lot more dynamic range,,better in the lower mid range to upper bass, better jump factor. when you crank up a good live recording they don't run out of steam.
I am not knocking stats...they do certain things very well.. I have owned quite a few,, but I found they all fell short in the dynamics that make music pop. They inspired me to make my speakers sound the way they do... Greg

Martinh
10-10-2012, 04:38
Thanks Rich,
That door leads to my hot water heater, so we don't go back there very often.
Yes, they sound a bit like ML electrostatics having a great mid range and very transparent and open sound stage, but a lot more dynamic range,,better in the lower mid range to upper bass, better jump factor. when you crank up a good live recording they don't run out of steam.
I am not knocking stats...they do certain things very well.. I have owned quite a few,, but I found they all fell short in the dynamics that make music pop. They inspired me to make my speakers sound the way they do... Greg

Hi Greg,

Im totally ignorant about panel type speakers and was wondering what sort of technology they use and what are the benefits?

Cheers,

Audio Al
10-10-2012, 11:29
:respect::respect::respect:

If you made these yourself well done

lots of people think about doing it but very few actually do it :)

GT Audio Works
10-10-2012, 14:29
Hi Greg,

Im totally ignorant about panel type speakers and was wondering what sort of technology they use and what are the benefits?

Cheers,Hi Martin
Planar magnetic speakers use a stretched thin plastic film attached to an open front to back frame. To this film is bonded aluminum foil conductors in an up and down pattern. This conductor is the speaker voice coil that connects to your amplifier. To the back of this frame is a perforated metal sheet( so sound can go thru ) to which many magnets are bonded in this same up and down pattern.When the music signal runs thru the conductor it creates a magnetic field that opposes and attracts the field set up by the magnets. Causing the panel to vibrate and create sound. see Maggies site for more...http://www.magnepan.com/magneplanar_technology
The advantage of this type of speaker is its large light weight diaphragm is driven more uniformly and creates a natural large as life sound.
Since the sound radiates front and back when it reaches your ear it sounds more real..To some folks anyway..I would recommend seeking out a dealer to demo a pair. To see if they are for you. When I heard them 30 years ago for the first time I was hooked from the first note !
Best regards,
Greg GT Audio Works
http://www.gtaudioworks.com/Home.html

GT Audio Works
10-10-2012, 14:35
:respect::respect::respect:

If you made these yourself well done

lots of people think about doing it but very few actually do it :)Thanks Al,
Yes the speakers are my own design and manufacture. More info can be had at my web site http://www.gtaudioworks.com/Home.html or the trade impressions for sale page of this forum.
Best Regards...Greg GT Audio Works

Martinh
10-10-2012, 19:44
Hi Greg,

Thanks for the explanation, you make it sound so easy to build, but I guess there's a lot of tweaking needed to get them to sound their best.

The two drivers at the bottom - are they just for the very low frequencies or do they extend through to the midrange?

Very nice indeed.

Cheers,

Martin


Hi Martin
Planar magnetic speakers use a stretched thin plastic film attached to an open front to back frame. To this film is bonded aluminum foil conductors in an up and down pattern. This conductor is the speaker voice coil that connects to your amplifier. To the back of this frame is a perforated metal sheet( so sound can go thru ) to which many magnets are bonded in this same up and down pattern.When the music signal runs thru the conductor it creates a magnetic field that opposes and attracts the field set up by the magnets. Causing the panel to vibrate and create sound. see Maggies site for more...http://www.magnepan.com/magneplanar_technology
The advantage of this type of speaker is its large light weight diaphragm is driven more uniformly and creates a natural large as life sound.
Since the sound radiates front and back when it reaches your ear it sounds more real..To some folks anyway..I would recommend seeking out a dealer to demo a pair. To see if they are for you. When I heard them 30 years ago for the first time I was hooked from the first note !
Best regards,
Greg GT Audio Works
http://www.gtaudioworks.com/Home.html

GT Audio Works
10-10-2012, 21:05
Hi Greg,

Thanks for the explanation, you make it sound so easy to build, but I guess there's a lot of tweaking needed to get them to sound their best.

The two drivers at the bottom - are they just for the very low frequencies or do they extend through to the midrange?

Very nice indeed.

Cheers,

Martin Yes..As mechanical transducers go they are simple in theory but in reality difficult to design properly. Kinda like a chocolate souffles.. just chocolate, butter, eggs and sugar but hard to do right !
The two 8" drivers are mid woofers and handle the upper bass..the low bass is handled by an 8" powered sub for each channel.

julesd68
11-10-2012, 13:04
Looking forward to seeing some pics of the GTA1 - when will they be ready?

GT Audio Works
11-10-2012, 14:39
Looking forward to seeing some pics of the GTA1 - when will they be ready?
Julian,
I had hoped to have them ready by now..but I am a small operation and pretty much do everything my self. I don't want to let them out till I am completely satisfied. I want them to have the core virtues of the larger model, but distilling down size and price and keeping these virtues is no easy task. With luck I would hope by late November or December
Regards,
Greg