Gerard124
29-09-2012, 16:12
Naim Snaic Lead 5 Pin to 5 Pin DIN, this one has been modified (blue and yellow cable cut at each end) to allow connection of a Naim Power Supply and Naim Pre-amp by the Avondale method (Please click here and scroll down page to see diagram (http://avondaleaudio.com/power-supply-comparison/)) i.e. this method ensures that the sensitive signal and power are not bundled together in the same cable
If however you can use a soldering iron, with just a little work this cable could be returned to it's original configuration and then used for connecting power supply to pre-amplifier/CD player/active crossover/phono stage.
It would then be compatible with Power Supplies: Dual rail SNAPS, Flatcap, Flatcap 2, Hi-Cap, Hi-Cap 2, Supercap, Supercap 2. CD Players: CD 3.5, CD 5, CD 5x Active Crossovers: Snaxo 2-4, Snaxo 3-6, Snaxo 242, Snaxo 362 Phono Stage: Stageline.
Unmolested these cables now retail for an eye watering £125.00 :doh:
Why not buy mine for £20.00 and spend a few minutes returning it to it's original configuration or try the Avondale method?
Delivery £3.50 or collection Manchester
Photos available on request
If however you can use a soldering iron, with just a little work this cable could be returned to it's original configuration and then used for connecting power supply to pre-amplifier/CD player/active crossover/phono stage.
It would then be compatible with Power Supplies: Dual rail SNAPS, Flatcap, Flatcap 2, Hi-Cap, Hi-Cap 2, Supercap, Supercap 2. CD Players: CD 3.5, CD 5, CD 5x Active Crossovers: Snaxo 2-4, Snaxo 3-6, Snaxo 242, Snaxo 362 Phono Stage: Stageline.
Unmolested these cables now retail for an eye watering £125.00 :doh:
Why not buy mine for £20.00 and spend a few minutes returning it to it's original configuration or try the Avondale method?
Delivery £3.50 or collection Manchester
Photos available on request